Administrator’s Guide(CP45FV) Eng.pdf - 第313页

Utility 18-5 Moves the selected file to the specified directory . <Delete> button    Deletes the selected file. <Rename> button Renames the selected file <Clear> button If the file size of a *.log fi…

100%1 / 321
Samsung Component Placer CP45FV Administrator’ Guide
Figure 18-5. . “Open” dialog box
18.4. File Man…[F5]
Figure 18-6. “File Manager” dialog box
<Select File Attribute:> group
When the extension file button in the Select File Attribute group is clicked, the
corresponding contents are indicated in the list.
<Send To A:> button
Copies the selected file on a floppy disk.
<Copy> button
Makes a copy of the selected file and as the original file exists under its original name,
saves the copied file under a different file name when using the copy command.
<Move> button
18-4
Utility
18-5
Moves the selected file to the specified directory.
<Delete> button
Deletes the selected file.
<Rename> button
Renames the selected file
<Clear> button
If the file size of a *.log file is very big, deletes the data saved previously.
18.5. Bypass[F8]
The <Bypass> command is used to bypass a PCB on the conveyor without carrying out
placement operation. When this command is selected, the following dialog box is
displayed and shows it is in the PCB Bypass status.
If the head is above the conveyor, the PCB sensing sensor gets affected. Therefore, move
the head out of the conveyor and execute the command.
Figure 18-7. . “By-pass Operation” dialog box
When the <Start> switch on the main body of this machine is pressed, starts the PCB
bypass operation. When the <Stop> switch or <Reset> switch on the main body of this
machine is pressed, cancels the PCB bypass operation status and closes the dialog box.
Samsung Component Placer CP45FV Administrator’ Guide
18.6. WarmUp[F9]
The <WarmUp> command is used to warm up each axis after power supply. When this
command is selected, the following dialog box is displayed.
Figure 18-8. . “Warm-Up” dialog box
Figure 18-9. “Warm-Up” dialog box, After pressing the Start Button
<Start> button
Starts the warm up operation. When this button is clicked on, starts the warm-up
operation and the elapsed time is displayed in the “Warm-up” dialog box. When this
button is clicked on again, stops the warm up operation and closes the “Warm-up”
dialog box.
<Start> button
18-6