Administrator’s Guide(CP45FV) Eng.pdf - 第191页

ANC Menu 12-3 For the explanation of this dialog box, please refer to [PCB Edit]. <Hole Position Detail …> button  Set the position of each hole of the ANC. When this button is clicked on, the following dialog box…

100%1 / 321
Samsung Component Placer CP45FV Series Administrator’s Guide
Head5: Selects Head5.
Head6: Selects Head6.
<Move> button
Moves the XY axis to the device selected in the <Device>. The positions to move to
are the positions of fiducial mark and each nozzle hole.
<Get> button
Reads in the current position of the XY axis of the device selected in the <Device>.
At this time, the position to be read is the position of the fiducial mark. The position
of each nozzle hole can be read with the “Get” button.
<Move Next> button
When this button is clicked on, moves the device selected in the “Device” to the next
hole of the currently selected hole of the ANC.
<Shutter On/Off> button
When this button is clicked on, the ANC shutter is turned on or off.
<No real motion> check box
When this button is checked, manipulates the data for pick and put functions without
actual operation.
<Pick> button
When this button is clicked on, picks up the nozzle in the currently selected hole of
the ANC. Select the head to pick in the “Device”.
<Put> button
When this button is clicked on, puts the nozzle in the head selected in the “Device” to
ANC.
<Put all nozzle> button
When this button is clicked on, puts the nozzles in all the heads to the ANC.
<Name> edit box
Set the name of ANC.
<Installed> group
In the case of installing the ANC on the feeder base, set the feeder base and lane to
install. The group is activated only for the gripper ANCs.
<Feeder Base> combo box
Select the feeder base to install the ANC.
<Lane No.> edit box
Set the lane number of the feeder base to install the ANC.
<Fiducial Mark Detail …> button
Set the fiducial mark data. When this button is clicked on, the following dialog box is
displayed.
12-2
ANC Menu
12-3
For the explanation of this dialog box, please refer to [PCB Edit].
<Hole Position Detail …> button
Set the position of each hole of the ANC. When this button is clicked on, the
following dialog box is displayed.
Samsung Component Placer CP45FV Series Administrator’s Guide
<Grid> group
Displays the position of each hole.
<Hole – Define> column
Displays the hole number.
<Position - X> column
Displays the X position of the hole
<Position - Y> column
Displays the Y position of the hole.
<Position - Z> column
Displays the Z position of the hole.
<Position - R> column
Displays the R position of the hole.
<ANC Hole Position Version> combo box
Enables the automatic setup of ANC hole position by selecting the ANC type.
Select the ANC type mounted.
ANC-W38*L406-37Hole.
ANC-W34*L411-37Hole.
<Device> combo box
To move or to read in the position of XY, Z, and R axes, select the corresponding
device. Available devices are as follows.
12-4