Administrator’s Guide(CP45FV) Eng.pdf - 第37页

S tructur e of MMI Menu 2-3 information. 2.1.2.2. Main menu tool-bars 2.1.2.2.1. The submenu tool-bars of the PCB Edit menu tool-bar                 Board Register various information on the board to be p…

100%1 / 321
Samsung Component Placer CP45FV Series Administrator’s Guide
2.1.2. Summary of functions
This section includes information on all the menus that are displayed on the MMI main
screen.
2.1.2.1. Main menu submenus
2.1.2.1.1. File command submenus
New
Used to create a new PCB file.
Open
Used to edit an existing PCB file.
Save
Used to save an opened file.
Save As
Used to save an opened file under a different name.
Merge Part Library
Use it to compare the Part Library of another machine with that of current machine
and merge.
Recent File
Displays a list of files worked on recently.
Exit
Ends MMI session and goes back to Windows or terminates the operation of the
machine.
2.1.2.1.2. View command submenus
Manual Tool
Enables manual operation of machine.
Current position
Displays the current position and nozzle name of each axis in real time.
System Error Message
Checks the error message window, which is displayed when there is an machine error.
Dump Information (Place Error)
Displays the status of dumped parts during machine operation.
Tool bar Position
Sets the position of Menu Tool bar on the screen.
Mark3 TSG
Shows the error occurred during machine operation.
2.1.2.1.3. Help command submenus
About CP45FV
Displays the machine's application program's current version and miscellaneous
2-2
Structure of MMI Menu
2-3
information.
2.1.2.2. Main menu tool-bars
2.1.2.2.1. The submenu tool-bars of the PCB Edit menu tool-bar
Board
Register various information on the board to be produced.
Part
Register various information about the components to be placed.
Feeder
Sets the data related to the Tape, Stick, and Tray Feeder.
Step
Defines the step for placement operation.
ANC Cfg
Shows the nozzle information when the nozzles of the previous PCB file and current
system ANC are different.
Cycle
Checks the cycle by step.
Opti
Executes Optimizer.
Cancel
Closes the dialog box for the Board, Part, Feeder, and Step.
2.1.2.2.2. The submenu tool-bars of the production menu tool-bar
Start
Starts operation after downloading PCB.
Stop
Stops operation.
Cont
Continues previous operation.
Finish
Finishes the downloaded operation completely.
T/F Count
Sets the position of the pocket to start picking up components from the Tray Feeder.
PCB Data Down Load To VME
Transmits PCB operation data to the machine. It is possible only when the machine
status is 'Finish'.
Placement Information
Checks the number of pickups, placements, and pickup error rates by head, nozzle,
and feeder.
Status Information
Samsung Component Placer CP45FV Series Administrator’s Guide
Checks the overall operation of the System.
2.1.2.2.3. The submenu tool-bars of the Utility menu tool-bar
Print
Used to print a PCB file or system data.
Pd. Info
Displays various production management data for the machine(total time, placement
information, and error information).
Copy
Use it to copy the existing PCB file data to other PCB files.
File Man
Use it to copy, delete, rename and clear the files related to MMI.
By Pass
Use it to bypass a PCB on the conveyor without placement operation.
Warmup
Warms up the driving axis after power supply.
2.1.2.2.4. The submenu tool-bars of the Diagnosis menu tool-bar
I / O
Check the I/O status.
Conveyor
Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.
Light
Checks the Camera Light.
Vacuum
Checks the Vacuum of each head
Jogbox
Checks the Jogbox function.
Tray
Checks the Tray Feeder function.
2.1.2.2.5. The submenu tool-bars of the Sys. Setup menu tool-bar
Head
Displays and sets the status of Head Block.
Limit
Sets the position limit for each axis to move.
Offset
Sets the offset value of the actual position of each device from the reference value of
the installation position.
Origin
2-4