N7201A618E00_0309.pdf - 第118页

NPM–W 2 EJM7DE-MB-02 -1T-00 Parts Re cognition Error Parts Re cognition Error Error Message Troubleshooting 2-1-3 Single stop er r or 25 Error Code Error Message Cause Inspection and Solution Mismatch occurred in the int…

100%1 / 338
NPM–W2 EJM7DE-MB-02-1T-00
non-collation
(verification2)
PartsTopSideRecCorrLim
Over
Nzl Height Last Val Diff
Err
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
The difference is over 0.1mm
compared to the last
measure result.
(Single stop error occurred.)
Check the mounting status of the
nozzle.Make sure that there is no
foreign body on the lens of the parts
recognition camera.Calibrate origin
offset Z-axis and multi recognition
camera offset.
40470
The offset position of
recognition object from parts
center is over the limit.
(Single stop error occurred.)
Please confirm if the following items
of head camera recognition
correction mount parameter are
set correctly in DGS.
1)The offset position of recognition
object from parts center
2)Limit
40471
Feeder which has been
pulled out and inserted^ but
has not executed verification
has been detected when
running starts.
(Single stop error occurred.)
Please start the production after
executing verification.
40472
2-1-3-47
NPM–W2 EJM7DE-MB-02-1T-00
Parts Recognition Error
Parts Recognition Error
Error
Message
Troubleshooting
2-1-3
Single stop error 25
Error Code
Error Message
Cause Inspection and Solution
Mismatch occurred in the
internal processing of
recognition function.Error
occurred in the parameter
area in the recognition
processing.
(Recognition error - Invalid
image processing
parameter )
Take any of the following measures:
1) Check the connection of
camera/sensor and lighting
units.Connected units can be
checked on the unit information
check screen.
2) Send the recognition data and
image detail data to PFSC.
43001
Mismatch occurred in the
internal processing of
recognition function.Error
occurred in the parameter
area in the recognition
processing.
(Recognition error - Invalid
image processing
parameter )
Take any of the following measures:
1) Check the connection of
camera/sensor and lighting
units.Connected units can be
checked on the unit information
check screen.
2) Send the recognition data and
image detail data to PFSC.
43002
2-1-3-48
NPM–W2 EJM7DE-MB-02-1T-00
Parts Recognition Error
Parts Recognition Error
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Mismatch occurred in the
internal processing of
recognition function.Error
occurred in the parameter
area in the recognition
processing.
(Recognition error - Invalid
image processing
parameter )
Take any of the following measures:
1) Check the connection of
camera/sensor and lighting
units.Connected units can be
checked on the unit information
check screen.
2) Send the recognition data and
image detail data to PFSC.
43003
Mismatch occurred in the
internal processing of
recognition function.Error
occurred in the parameter
area in the recognition
processing.
(Recognition error - Invalid
image processing
parameter )
Take any of the following measures:
1) Check the connection of
camera/sensor and lighting
units.Connected units can be
checked on the unit information
check screen.
2) Send the recognition data and
image detail data to PFSC.
43004
2-1-3-49