N7201A618E00_0309.pdf - 第278页

NPM–W 2 EJM7DE-MB-02 -1T-00 Supply Position Pallet No. Acquire Error Pick-up Position Pallet No. Acquire Error Pallet Information Switch Error Defined Co ordinate Acquire Error Error Message Troubleshooting 2-1-4 Emer ge…

100%1 / 338
NPM–W2 EJM7DE-MB-02-1T-00
Undefined Offset Setting
Undefined Tray Setting
Undefined/O Output
Setting
Undefined I/O Setting
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Input of undefined I/O was
attempted to be acquired.
(Undefined I/O input
designation error occurred.)
Close the error screen and restart
production.If the error persists,
check the situation of the error
occurred and error message, and
contact PFSC.
2188
Undefined I/O was attempted
to be output.
(Undefined I/O output
designation error occurred.)
Close the error screen and restart
production.If the error persists,
check the situation of the error
occurred and error message, and
contact PFSC.
2189
Undefined tray No. has been
specified.
(Undefined tray designation
error occurred.)
Close the error screen and restart
production.If the error persists,
check the situation of the error
occurred and error message, and
contact PFSC.
2200
Undefined offset has been
specified.
(Undefined offset designation
error occurred.)
Close the error screen and restart
production.If the error persists,
check the situation of the error
occurred and error message, and
contact PFSC.
2201
2-1-4-108
NPM–W2 EJM7DE-MB-02-1T-00
Supply Position Pallet No.
Acquire Error
Pick-up Position Pallet No.
Acquire Error
Pallet Information Switch
Error
Defined Coordinate
Acquire Error
Error
Message
Troubleshooting
2-1-4
Emergency stop errors
55
Error Code
Error Message
Cause Inspection and Solution
Failed to obtain the
coordinates of TL/TP axes.
(Error obtaining defined
coordinates.)
Close the error screen and restart
production.If the error persists,
check the situation of the error
occurred and error message, and
contact PFSC.
2202
Failed to overwrite the pallet
information of pickup and
supply positions.
(Pallet information change
error occurred.)
Choose [Arrange] - [Parts prepare] -
[Tray] - [Check install] and check the
pallet Nos. set at the pickup and
supply positions of the tray and
correct them if necessary.
2203
Invalid pallet No. at the
pickup position.
(Pickup position pallet No.
acquisition error occurred.)
Choose [Arrange] - [Parts prepare] -
[Tray] - [Check install] and check the
pallet No. set at the pickup position
of the tray and correct them if
necessary.
2204
Invalid pallet No. at the
supply position.
(Supply position pallet No.
acquisition error occurred.)
Choose [Arrange] - [Parts prepare] -
[Tray] - [Check install] and check the
pallet Nos. set at the supply
position of the tray and correct them
if necessary.
2205
2-1-4-109
NPM–W2 EJM7DE-MB-02-1T-00
Magazine Shutter Open
Error
Supply Section Shutter
Close Error
Supply Section Shutter
Open Error
Origin Offset Acquire Error
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Failed to obtain origin offset
from the tray unit.
(Error obtaining origin offset.)
1) Check the connection with the
tray unit.
2) If the error persists, check the
situation of the error occurred and
error message, and contact PFSC.
2206
Supply shutter failed to close
or the limit switch failed to
detect the open shutter.
(Supply shutter open error
occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and check the
condition of the limit switch for
detecting the open/closed shutter.
2207
Supply shutter failed to open
or the limit switch failed to
detect the closed shutter.
(Supply shutter close error
occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and check the
condition of the limit switch for
detecting the open/closed shutter.
2208
Magazine shutter failed to
close or the limit switch failed
to detect the open shutter.
(Magazine shutter open error
occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and check the
condition of the limit switch for
detecting the open/closed shutter.
2209
2-1-4-110