N7201A618E00_0309.pdf - 第184页

NPM–W 2 EJM7DE-MB-02 -1T-00 Servo Amplifier Abnormality (Rear X axis) Servo Amplifier Abnormality (Front Y axis) Servo Amplifier Abnormality (Front X axis) Nozz le Interference Are a Intrusion (Rear Side Rear Row) Error …

100%1 / 338
NPM–W2 EJM7DE-MB-02-1T-00
Nozzle Interference Area
Intrusion
(Rear Side Front Row)
Nozzle Interference Area
Intrusion
(Front Side Rear Row)
Nozzle Interference Area
Intrusion
(Front Side Front Row)
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1324
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1325
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1326
2-1-4-14
NPM–W2 EJM7DE-MB-02-1T-00
Servo Amplifier
Abnormality
(Rear X axis)
Servo Amplifier
Abnormality
(Front Y axis)
Servo Amplifier
Abnormality
(Front X axis)
Nozzle Interference Area
Intrusion
(Rear Side Rear Row)
Error
Message
Troubleshooting
2-1-4
Emergency stop errors
8
Error Code
Error Message
Cause Inspection and Solution
Any of the following causes
is likely:
1) Z-axis interference sensor
may be at fault or sensor
cable may be broken.
2) Y-axis interference sensor
may be at fault or sensor
cable may be broken.
(Interlock occurred.)
Choose [Machine] - [Adjust] - [All] -
[Input confirm] and if any problem is
found, contact PFSC.
1327
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the X/Y axes and restart the
machine.
2) If the error persists, contact
PFSC.
1328
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the X/Y axes and restart the
machine.
2) If the error persists, contact
PFSC.
1329
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the X/Y axes and restart the
machine.
2) If the error persists, contact
PFSC.
1330
2-1-4-15
NPM–W2 EJM7DE-MB-02-1T-00
AMP Detect AC_FAIL
Error
Y Axis Interference
Servo Amplifier
Abnormality
(Rear Y axis)
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Servo driver is at fault.
(Interlock occurred.)
1) Make sure there is no obstacle to
the X/Y axes and restart the
machine.
2) If the error persists, contact
PFSC.
1331
Front X/Y axes and rear X/Y
axes interfered with each
other.
(Interlock occurred.)
Separate them from the opposite
X/Y axes.
1332
Power supply may have
been stopped momentarily
due to power failure.
(Instantaneous power failure
occurred due to power
voltage of servo amplifier)
Check the voltage of the power
supply in the plant. Return to the
main menu and restart production. If
the error persists, contact PFSC.
1333
2-1-4-16