N7201A618E00_0309.pdf - 第207页

NPM–W 2 EJM7DE-MB-02 -1T-00 Linear Scale Status 0 Protection Drive Prohibit Input Protection EEPROM Abnormal Check Code Protectio n EEPROM Abnormal Parameter Code Protection Linea Scale Communication Abnormality Protecti…

100%1 / 338
NPM–W2 EJM7DE-MB-02-1T-00
Software Limit Protection
Deviation Counter Over
Protection
Linear Scale Abnormality
Protection
Abnormal Command
Protection
Excess Speed Protection
Error
Message
Troubleshooting
2-1-4
Emergency stop errors
19
Error Code
Error Message
Cause Inspection and Solution
Servo amplifier or motor may
be at fault.
(Motor rotating speed
exceeded the set value.)
After turning OFF the machine
power, if the error persists, contact
PFSC.
1598
Host controller^ servo
amplifier or servomotor may
be at fault.
(Command speed from the
host controller is beyond the
specified value.)
After turning OFF the machine
power, if the error persists, contact
PFSC.
1599
Linear scale may be
disconnected or at fault.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1600
Servo amplifier or motor may
be at fault.
(Motor cannot follow the
command.)
After turning OFF the machine
power, if the error persists, contact
PFSC.
1601
Servo amplifier or motor may
be at fault.
(Motor cannot follow the
command.)
After turning OFF the machine
power, if the error persists, contact
PFSC.
1602
2-1-4-37
NPM–W2 EJM7DE-MB-02-1T-00
Linear Scale Status 0
Protection
Drive Prohibit Input
Protection
EEPROM Abnormal
Check Code Protection
EEPROM Abnormal
Parameter Code
Protection
Linea Scale
Communication
Abnormality Protection
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Linear scale may be
disconnected or at fault.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1603
Servo amplifier may be at
fault.
(Error in ROM data in the
servo amplifier.)
After turning OFF the machine
power, if the error persists, contact
PFSC.
1604
Servo amplifier may be at
fault.
(Error in ROM data in the
servo amplifier.)
After turning OFF the machine
power, if the error persists, contact
PFSC.
1605
Servo amplifier may be at
fault.
(Emergency stop input to the
servo amplifier detected.)
After turning OFF the machine
power, if the error persists, contact
PFSC.
1606
Linear scale may be
disconnected^ at fault or out
of adjustment.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1607
2-1-4-38
NPM–W2 EJM7DE-MB-02-1T-00
Linear Scale Status 5
Protection
Linear Scale Status 4
Protection
Linear Scale Status 3
Protection
Linear Scale Status 2
Protection
Linear Scale Status 1
Protection
Error
Message
Troubleshooting
2-1-4
Emergency stop errors
20
Error Code
Error Message
Cause Inspection and Solution
Linear scale may be
disconnected^ at fault or out
of adjustment.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1608
Linear scale may be
disconnected^ at fault or out
of adjustment.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1609
Linear scale may be
disconnected^ at fault or out
of adjustment.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1610
Linear scale may be
disconnected^ at fault or out
of adjustment.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1611
Linear scale may be
disconnected^ at fault or out
of adjustment.
(Linear scale error detected.)
Check the situation of the error
occurred and error message, and
contact PFSC.
1612
2-1-4-39