N7201A618E00_0309.pdf - 第153页

NPM–W 2 EJM7DE-MB-02 -1T-00 Nozz le Stuffed Check Error Rough Dete ct Error (1) Solutions to errors Error Code Error Message Cause Inspection and Solution No pattern detecte d after removing noise or skipped pattern. (In…

100%1 / 338
NPM–W2 EJM7DE-MB-02-1T-00
Rough Detect Error
(0)
Picture contrast Error
Error
Message
Troubleshooting
2-1-3
Single stop error 42
Error Code
Error Message
Cause Inspection and Solution
Failed to find threshold for
boundary detection.
(Insufficient dispensing error
occurred during priming shot
recognition.)
Take any of the following measures:
1) Execute eject check by
dispensing the material forcibly.
2) Perform priming shot teaching
and check the shot condition.
3) Correct the parameter(s) that
caused the error.
43501
No pattern detected during
boundary detection.
(Insufficient dispensing error
occurred during priming shot
recognition.)
Take any of the following measures:
1) Execute eject check by
dispensing the material forcibly.
2) Perform priming shot teaching
and check the shot condition.
3) Correct the parameter(s) that
caused the error.
43502
2-1-3-82
NPM–W2 EJM7DE-MB-02-1T-00
Nozzle Stuffed Check
Error
Rough Detect Error
(1)
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
No pattern detected after
removing noise or skipped
pattern.
(Insufficient dispensing error
occurred during priming shot
recognition.)
Take any of the following measures:
1) Execute eject check by
dispensing the material forcibly.
2) Perform priming shot teaching
and check the shot condition.
3) Correct the parameter(s) that
caused the error.
43503
No pattern found in more
than one point of multiple
nozzles in clogged nozzle
check.
(Clogged nozzle error
occurred during priming shot
recognition.)
Take any of the following measures:
1) Execute eject check by
dispensing the material forcibly.
2) Check the nozzle in use.
3) Perform priming shot teaching
and check the shot condition.
4) Correct the parameter(s) that
caused the error.
43504
2-1-3-83
NPM–W2 EJM7DE-MB-02-1T-00
Down Lead Check Error
Fly Pattern Check Error
Error
Message
Troubleshooting
2-1-3
Single stop error 43
Error Code
Error Message
Cause Inspection and Solution
Skipped pattern detected in
skipped pattern check.
(Inspection error occurred
during priming shot
recognition. )
Take any of the following measures:
1) Perform priming shot teaching
and check the shot condition.
2) Correct the parameter(s) that
caused the error. Lower the setting
temperature of adhesive to reduce
adhesive scattering.
43505
Cobwebbing detected in
cobwebbing check.
(Inspection error occurred
during priming shot
recognition. )
Take any of the following measures:
1) Perform priming shot teaching
and check the shot condition.
2) Correct the parameter(s) that
caused the error. Increase the
setting value at the head rising
position to heighten the pull-up
height of the nozzle. Raise the
setting temperature of adhesive to
reduce cobwebbing.
43506
2-1-3-84