N7201A618E00_0309.pdf - 第255页

NPM–W 2 EJM7DE-MB-02 -1T-00 IspBox SubSys Sample inspection err or IspBox SubSys Ins pection result data Memory abnormal IspBox SubSys Ins pection process interrupt IspBox SubSys Image data Unma tched error Solutions to …

100%1 / 338
NPM–W2 EJM7DE-MB-02-1T-00
IspBox SubSys Inspection
result data evolution error
IspBox SubSys Production
data Transfer error
IspBox SubSys Production
data View data error
IspBox SubSys Common
image memory ensure
error
Error
Message
Troubleshooting
2-1-4
Emergency stop errors
43
Error Code
Error Message
Cause Inspection and Solution
Improper procedure was
taken in software processing.
(Failed to obtain the memory
for shared images.)
Restart the machine. If the error
persists, contact PFSC.
1898
View data in production data
could not be obtained
properly.
(Failed to obtain the view
data in production data.)
Optimize the production data.
1899
Improper procedure was
taken in software processing.
(Production data not
transferred to inspection sub
system.)
Restart the machine. If the error
persists, contact PFSC.
1900
Improper procedure was
taken in software processing.
(Inspection failed.)
Restart the machine. Then,
download the production data again.
1901
2-1-4-85
NPM–W2 EJM7DE-MB-02-1T-00
IspBox SubSys Sample
inspection error
IspBox SubSys Inspection
result data Memory
abnormal
IspBox SubSys Inspection
process interrupt
IspBox SubSys Image
data Unmatched error
Solutions to errors
Error Code
Error Message
Cause Inspection and Solution
Improper procedure was
taken in software processing.
(Necessary image to be
loaded not found in the
view.)
Load the entire PCB image again.
1902
Inspection process was
stopped.
(Inspection process was
interrupted.)
Cancel stopping and resume the
process.
1903
Improper procedure was
taken in software processing.
(Insufficient memory space
of result data.)
Restart the machine. If the error
persists, contact PFSC.
1904
Improper procedure was
taken in software processing.
(Failed to inspect the sample
image.)
Restart the machine. If the error
persists, contact PFSC.
1905
2-1-4-86
NPM–W2 EJM7DE-MB-02-1T-00
IspBox SubSys Production
data not evolved error
IspBox SubSys Production
data evolution error
IspBox SubSys Mark
correction error
IspBox SubSys Inspection
template data make error
IspBox SubSys State
abnormal
Error
Message
Troubleshooting
2-1-4
Emergency stop errors
44
Error Code
Error Message
Cause Inspection and Solution
Improper procedure was
taken in software processing.
(Application condition is
abnormal.)
Restart the machine. If the error
persists, contact PFSC.
1906
Improper procedure was
taken in software processing.
(Failed to create inspection
template data.)
Restart the machine. If the error
persists, contact PFSC.
1907
Improper procedure was
taken in software processing.
(Failed to register mark result
information.)
Restart the machine. If the error
persists, contact PFSC.
1908
Improper procedure was
taken in software processing.
(Inspection box system error
occurred.)
Restart the machine. If the error
persists, contact PFSC.
1909
Improper procedure was
taken in software processing.
(Inspection box system error
occurred.)
Restart the machine. If the error
persists, contact PFSC.
1950
2-1-4-87