N7201A618E00_0309.pdf - 第90页

NPM–W 2 EJM7DE-MB-02 -1T-00 Host Feeder Time Out Feeder Setting Er ror Mount Pos Teach Ope. Err Servo Off Error Error Message Troubleshooting 2-1-3 Single stop er r or 11 Error Code Error Message Cause Inspection and Sol…

NPM–W2 EJM7DE-MB-02-1T-00

Inspect Mc Feedback Err

Pick-up Pos Gap Detect

Parts verify Request Stop

Filter Clearing

Solutions to errors

Error Code

Error Message

Cause Inspection and Solution

Any of the following causes

is likely:

1) Nozzle filter clogged.

2) Nozzle clogged.

(Single stop error occurred.)

Take measures shown with the

same number as that of the cause.

1) Clean the nozzle filter.

2)Clean the nozzle.

40358

Stop information arrived from

the component verification

system.

(Single stop error occurred.)

Production can be restarted if the

request to stop command is reset.

40359

Feeder's pickup position is

displaced by the unit of pitch.

(Single stop error occurred.)

Adjust the pickup position with the

[Feed] button.

40360

Same kind of error occurred

10 times in one hour at each

mounting point.

(Single stop error occurred.)

Press the [Solution] button.

40361

2-1-3-19

NPM–W2 EJM7DE-MB-02-1T-00

Host Feeder Time Out

Feeder Setting Error

Mount Pos Teach Ope.

Err

Servo Off Error

Error

Message

Troubleshooting

2-1-3

Single stop error 11

Error Code

Error Message

Cause Inspection and Solution

Any of the following causes

is likely:

1) Axis movement is

disabled because the servo

switch is OFF.

2) Axis movement is

disabled because interlock

is engaged in the adjoining

machine.

(Single stop error occurred.)

Take measures shown with the

same number as that of the cause.

1) Choose [Machine] - [Adjust] - [All]

- [Input confirm] and check the

condition of the servo switch and

contact PFSC.

2) Release the interlock of the

adjoining machine.

40362

Teaching started with the

setting that does not match

the operating condition for

teaching. Or teaching

condition cannot be met due

to error during teaching.

(Single stop error occurred.)

Reset the tray counter. Eliminate

the cause if recognition or pickup

error has occurred. Reset the bad

head setting.

40363

Failed to make feeder setting.

(Single stop error occurred.)

Make sure the attached feeder is

correct. If something is wrong with

the feeder, replace it with a proper

one.

40364

Timeout occurred during

waiting for completion of

preparation for pickup by

host feeder.

(Single stop error occurred.)

Check the feeder.

40365

2-1-3-20

NPM–W2 EJM7DE-MB-02-1T-00

Stamp Unit Cover Open

Stamp Material Leak Err

Machine File Name

Mismatch

Changeover Cart

Unconnected

Feeder Abnormality

Solutions to errors

Error Code

Error Message

Cause Inspection and Solution

Abnormality found in the

feeder.

(Single stop error occurred.)

Check the feeder.

40366

Feeder cart connector not

connected.

(Single stop error occurred.)

Connect the feeder cart

again.Choose [Machine] - [Adjust] -

[All] - [Input confirm] and check the

connection of feeder cart. If any

problem is found, contact PFSC.

40367

Production data may not

agree with that of the

preceding machine.

(Single stop error occurred.)

Download the production data again.

40368

Transcript material is spilling.

(Single stop error occurred.)

Check the transcript feeder.

40369

Transcript unit cover is open.

(Single stop error occurred.)

Close the transcript unit cover.

40370

2-1-3-21