3OM-1075-002.pdf - 第132页
4.4.3 "O-data" T ab • Sheet Layout When the "O-data" tab is pressed in the "Placement Data" tab sheet, the following tab sheet appears. Fig. 3B177 "O-data" T ab Sheet • Sheet Compo…
*3 P-No.
Shown are the step Nos.
Refer to "• Operation Procedure" (described later) for the
detailed information on how to add or delete a step No. (P-
No.).
*4 X [mm], Y [mm], Z=theta, H, Fdr. No., C, S, HD, PU,
Comment, V, X1 [mm], Y1 [mm], X2 [mm], Y2 [mm], FM1, FM2
• Operation Procedure
Addition of "P-No."
(1) When the [Add One Line] icon (
) is selected, a new step (line)
is added to the last one (last P-No.).
Insertion of "P-No."
(1) Use the touch screen or the pointing device to select the step in
which a new feeder No. (Fdr. No.) should be inserted.
(2) When the [Insert One Line] icon (
) is selected, a step (line) is
inserted at the selected position and the subsequent steps (P-
Nos.) are shifted down.
Deletion of "P-No."
(1) Use the touch screen or the pointing device to select the line (P-
No.) to be deleted.
(2) When the [Cut] icon (
) is selected, the selected line (P-No.) is
deleted and the subsequent lines (P-Nos.) are shifted up.
Step (P-No.) Copy and Paste Commands
(1) Use the touch screen or the pointing device to select the line (P-
No.) to be copied.
(2) When the [Copy] icon (
) is selected, the selected line (P-No.)
is copied.
(3) Select the position of the line (P-No.) to be pasted.
(4) When the [Paste] icon (
) is selected, the selected line (P-No.)
is pasted.
0206-001 2- 111
AHB01EDTP
4.4 "Placement Data" Tab
4.4.3 "O-data" Tab
• Sheet Layout
When the "O-data" tab is pressed in the "Placement Data" tab sheet,
the following tab sheet appears.
Fig. 3B177 "O-data" Tab Sheet
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" for the detailed in-
formation on how to enter each parameter.
*1 O-No.
Shown are the step Nos.
To add or delete an "O-No.", follow the steps under "• Op-
eration Procedure" in "4.4.2 "P-data" Tab".
*2 X [mm], Y [mm], Z=theta, H, C, Comment, B-X [mm] (Option),
B-Y [mm] (Option)
*1
*2
0308-002 2-112 AHB01EDTP
4.4 "Placement Data" Tab
Fig. 3B178 "O-data" Tab Sheet
• Operation Procedure
New Creation of "O-data" Tab
(1) When the second toolbar is not visible, press the [Second Toolbar]
icon ( ). The second toolbar opens.
(2) Touch or select the "Un" tab where a "P-data" tab should be added
with the pointing device.
(3) Select the [Add Repetitive O Data] icon (
). a new "O-data" tab
is added.
Deletion of "O-data" Tab
(1) When the second toolbar is not visible, press the [Second Toolbar]
icon (
). The second toolbar opens.
(2) Touch or select the "Un" tab that contains the offset data (repeti-
tive O data) to be deleted with the pointing device.
(3) Select the [Delete Repetitive O Data] icon (
). The "O-data"
tab of the selected U data is deleted.
0206-001 2-113
AHB01EDTP
4.4 "Placement Data" Tab