3OM-1075-002.pdf - 第323页

0308-003 5-90 AHB01EDTP 3.1 "Nozzle Stocker Data" T ab 3 . 1 "Nozzle Stocker Data" T ab The machine performs the nozzle change operation during automatic operation according to this nozzle stocker dat…

*2 Icons

The following functions can be executed.

: When pressed, this closes the "Nozzle Data" window.

: When pressed, this saves the entered parameters.

: When pressed, this checks the entered parameters.

When an error is found, an error message box opens.

: When pressed, this opens the "Nozzle Type" window,

enabling you to change the nozzle types.

(a) Double-clicking a text box also opens the "Nozzle Type"

window.

(b) Clicking the "Nozzle ID" label (title) selects the nozzle Nos.

on all heads at a time.

: When pressed, the "Nozzle Type Property" window

opens, enabling the operator to add a new nozzle type.

This function is available only in the "Nozzle Data" tab sheet.

: When pressed, this deletes the selected nozzle type.

This function is available only in the "Nozzle Data" tab sheet.

: When pressed, this opens the "Nozzle Type Property"

window for the selected nozzle type, enabling the op-

erator to change the nozzle type.

This function is available only in the "Nozzle Data" tab sheet.

: When pressed, this fills all the selected text boxes with

the parameter in the first text box.

: When pressed, this fills all the selected text boxes with

the parameter in the last text box.

: When pressed, this initializes the selection (sets the

defaults).

0206-002 5-89

AHB01EDTP

3. "Nozzle Data" Window

0308-003 5-90 AHB01EDTP

3.1 "Nozzle Stocker Data" Tab

The machine performs the nozzle change operation during automatic

operation according to this nozzle stocker data.

Be sure to enter parameters correctly. Otherwise, the

nozzles may interfere with each other.

••

• Sheet Layout

When the "Nozzle Stocker Data" tab is pressed in the "Nozzle Data"

window, the following tab sheet appears inside the window.

Fig. 3E79 "Nozzle Stocker Data" Tab Sheet

••

• Sheet Composition

*1 Tabs and Tab Sheets

The "Nozzle Stocker Data" tab sheet is provided with 2 tabs -

"Stocker B1" and "Stocker B2". When a tab is pressed, the corre-

sponding tab sheet appears.

The same items appear in the "Stocker B1" and "Stocker B2" tab

sheets.

*2 Address

Shown are the addresses of the nozzle stocker.

*3 *4 *5

CAUTION

*3 Nozzle ID

Nozzle IDs can be specified.

When an arbitrary nozzle ID is selected and the [ ] icon is

pressed, the "Nozzle Type" window opens.

Double-clicking the "Nozzle ID" (title) also opens the "Nozzle

Type" window.

*4 Direction [

° °

° ]

(Not Available)

In principle, "000" (0

°°

°) must be specified.

This is the reserved data for special nozzles, etc., that are used

to place special component.

*5 C

Set control commands in the text boxes.

- : This command handles the steps as those used for com-

ponent placement.

S : This command invalidates the steps.

This command prohibits the use of the nozzle in the stocker ad-

dress where the nozzle ID is already set.

When "S" (bypass designation) is set, the control process is

handled in the same way as the blank setting.

01 12-001 5-91

AHB01EDTP

3.1 "Nozzle Stocker Data" Tab