3OM-1075-002.pdf - 第157页

AHB01EDTP 0308-003 3-22 3.2 "Shape Data" T ab (1) Component shape : IC (Simple) *1 T ype Different items will be displayed in "*5" and "*6", depending on which type is selected in this text …

100%1 / 357
AHB01EDTP
3.2.5 "Lead Data" Tab (Simple Shape)
The corresponding tab sheet appears when "IC (Simple)", "Connector
(Simple)", or "Other Leaded (Simple)" is selected in the "Component
shape" text box.
••
••
• Sheet Layout
When the "Lead Data" tab is pressed in the "Shape Data" tab sheet,
the following tab sheet appears.
Fig. 3C17 "Lead Data" Tab Sheet ("IC (Simple)" Selected)
••
••
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" in "Section 2" for the
detailed information on how to enter parameters.
0308-003 3-21
3.2 "Shape Data" Tab
*5
*6
*1
*2
*3
*4
AHB01EDTP
0308-003 3-22
3.2 "Shape Data" Tab
(1) Component shape : IC (Simple)
*1 Type
Different items will be displayed in "*5" and "*6", depending on which
type is selected in this text box.
Gull Wing
"Width [mm]" and "Length [mm]" appear in "*5".
"Type No.", "Direction", "# of Leads [pcs.]", "Pitch [mm]", "Posn
(Latl) Det [mm]", "Missing Lead Start", "# of Missing Leads [pcs.]",
and "Insp Condtn" appear in "*6".
J Bend and Straight
"Width [mm]", "Length [mm]", and "Full Length [mm]" appear in "*5".
"Type No.", "Direction", "# of Leads [pcs.]", "Pitch [mm]", "Posn (Latl)
Det [mm]", "Missing Lead Start", "# of Missing Leads [pcs.]", and
"Insp Condtn" appear in "*6".
Leadless
"Width [mm]" and "Full Length [mm]" appear in "*5".
"Type No.", "Direction", "# of Leads [pcs.]", "Pitch [mm]", "Posn (Latl)
Det [mm]", "Posn (Long) Det [mm]", "Missing Lead Start", "# of Miss-
ing Leads [pcs.]", and "Insp Condtn" appear in "*6".
*2 # of Types, *3 # of Groups
*4 Extended setting
Different items will be displayed in "*6", depending on which param-
eter ("Disable" or "Enable") is set in this text box.
Disable
"Type No.", "Direction", "# of Leads [pcs.]", and "Pitch [mm]" appear
in "*6".
Enable
"Type No.", "Direction", "# of Leads [pcs.]", "Pitch [mm]", "Posn (Latl)
Det [mm]", "Posn (Long) Det [mm]", "Missing Lead Start", "# of Miss-
ing Leads [pcs.]", and "Insp Condtn" appear in "*6".
*5 Lead Type Data
Width [mm], Length [mm], Full Length [mm]
*6 Lead Group Data
Type No., Direction, # of Leads [pcs.], Pitch [mm], Posn (Latl)
Det [mm], "Posn (Long) Det [mm]", Missing Lead Start, # of
Missing Leads [pcs.], and Insp Condtn
AHB01EDTP
0308-004 3-23
3.2 "Shape Data" Tab
(2) Component shape : Connector (Simple), Other Leaded
(Simple)
*1 Type
Different items will be displayed in "*5" and "*6", depending on which
type is selected in this text box.
Standard
"Width [mm]" and "Length [mm]" appear in "*5".
"Type No.", "Direction", "# of Leads [pcs.]", "Pitch [mm]", "Posn (Latl)
Det [mm]", "Missing Lead Start", "# of Missing Leads [pcs.]", and
"Insp Condtn" appear in "*6".
Electd
"Shape", "Width [mm]", and "Full length [mm]" appear in "*5".
"Type No.", "Direction", "# of Leads [pcs.]", "Pitch [mm]", "Posn (Latl)
Det [mm]", "Posn (Long) Det [mm]", "Missing Lead Start", "# of Miss-
ing Leads [pcs.]", and "Insp Condtn" appear in "*6".
*2 # of Types, *3 # of Groups
*4 Extended setting
Different items will be displayed in "*6", depending on which param-
eter ("Disable" or "Enable") is set in this text box.
Disable
"Type No.", "Direction", "# of Leads [pcs.]", and "Pitch [mm]" appear
in "*6".
Enable
"Type No.", "Direction", "# of Leads [pcs.]", "Pitch [mm]", "Posn (Latl)
Det [mm]", "Missing Lead Start", "# of Missing Leads [pcs.]", and
"Insp Condtn" appear in "*6".
*5 Lead Type Data
Shape, Width [mm], Length [mm], Full Length [mm]
*6 Lead Group Data
Type No., Direction, # of Leads [pcs.], Pitch [mm], Posn (Latl)
Det [mm], Posn (Long) Det [mm], Missing Lead Start, # of Miss-
ing Leads [pcs.], and Insp Condtn