3OM-1075-002.pdf - 第278页

T able 3E8 T abs Description Component Recog The corresponding tab sheet enables the operator to set the offset Movable Camera data for adjustment of positional and angular deviations compared with the design dimensions …

2.1.6 "Camera" Tab

• Sheet Layout

When the "Camera" tab is pressed in the "Offset Data" tab sheet, the

following tab sheet appears.

Fig. 3E47 "Camera" Tab Sheet

• Sheet Composition

*1 Tabs and Tab Sheets

The "Camera" tab sheet is provided with the following 4 tabs.

When each tab is pressed, the corresponding tab sheet appears.

2.1 "Offset Data" Tab

0308-004 5-45 AHB01EDTP

Table 3E8

Tabs Description

Component Recog The corresponding tab sheet enables the operator to set the offset

Movable Camera data for adjustment of positional and angular deviations compared

with the design dimensions of the component recognition movable

camera center position (viewed from the P.C.B. positioning X/Y coor-

dinates).

Component Recog The corresponding tab sheet enables the operator to set the offset

Fixed Camera data for adjustment of positional and angular deviations compared

with the design dimensions of the component recognition fixed cam-

era center position (viewed from the P.C.B. positioning X/Y coordi-

nates).

Component Recog The corresponding tab sheet enables the operator to set the magnifi-

Magnification cations of the component recognition cameras and the gain and level

Gain Level (the amplification at which the image signals captured by the camera

is converted into picture information, representing brightness) of each

camera.

P.E.C. Recog Camera The corresponding tab sheet enables the operator to set the offset

data for horizontal swing adjustment of the P.E.C. recognition cam-

era.

2.1 "Offset Data" Tab

0206-003 5-46 AHB01EDTP

2.1.6.1 "Component Recog Movable Camera" Tab

• Sheet Layout

When the "Component Recog Movable Camera" tab is pressed in

the "Camera" tab sheet, the following tab sheet appears.

Fig. 3E48 "Component Recog Movable Camera" Tab Sheet

• Sheet Composition

*1 Offset Items

Set the offset values related to each nozzle (1 through 6) for the

movable cameras (M1 and M2).

L [mm] (Height), Z (Angle) [deg], and NC (Angle) [deg]

(Not Available)

This offset data is used to optimize the component recognition that

will be made, using the movable cameras.

2.1 "Offset Data" Tab

0308-004 5-47 AHB01EDTP