3OM-1075-002.pdf - 第21页
1.1.1 Outline of V arious Data The pattern program is composed of the following data. Operation Data : This data is used to generally manage the pattern program data. Placement Feeder Location : This data is used to set …
1. Outline of Pattern Program
1.1 Composition of Pattern Program
The pattern program is composed of the following data.
Pattern Program (Section 2)
Pattern Program Name (2.2)
Operation Data (2.3) P.C.B. Data (A01)
P.C.B. Recognition Data (A02)
P.C.B. Recognition Mark Data (A03)
Setup Data (A04)
Placement Feeder Location (2.4) Feeder Base #1 (B01)
Feeder Base #3 (B01)
Feeder Base #4 (B01)
Tray #2 F701-F799 (Option)
Tray #2 F801-F899 (Option)
Tray Step (Option)
FB #3 VIB Feeder #1 (B02)
FB #3 VIB Feeder #2 (B02)
FB #3 VIB Feeder #3 (B02)
FB #4 VIB Feeder #1 (B02)
FB #4 VIB Feeder #2 (B02)
FB #4 VIB Feeder #3 (B02)
Component ID
Component Library
Placement Data (2.5)
Placement Data U01 (C01) P-data (C02)
Placement Data U02 (C01) O-data (C03)
Placement Data Un (C01)
(a) "(2.2) through (2.5)", "(A01) through (A04)", "(B01)", "(B02)",
and "(C01) through (C03)" show the item Nos. to be referred
to.
(b) The above hierarchical sequence is based on the selection
of the multi-layer tray feeder (option).
Fig. 3B1 Composition of Pattern Program
1. Outline of Pattern Program
01 12-002 2-1 AHB01EDTP
1.1.1 Outline of Various Data
The pattern program is composed of the following data.
Operation Data : This data is used to generally manage
the pattern program data.
Placement Feeder Location : This data is used to set parameters
which determine a component ID
(type) to be allocated to each feeder
slot No. (Fdr. No.).
Placement Data : The set parameters (designation of
coordinates and direction) are used for
placement of components allocated in
the placement feeder location data.
1.1.2 Input Procedure of Each Data
Refer to "4. "Pattern Program" Edit Window" for detailed information on
how to enter each parameter.
After entering each parameter, using the network terminal (option), send
it to the main machine.
Pattern Program Data Sheets
Make use of the pattern program data sheets described in "Sec-
tion 6".
0206-002 2-2
AHB01EDTP
1.1 Composition of Pattern Program
1.2 Composition of Operation Data
This data is used to generally manage the pattern program data.
This data is composed of the P.C.B. data, the P.C.B. recognition data,
the P.C.B. recognition mark data, and the setup data.
Refer to "2.3 Operation Data" in "Section 2" for details.
A01 P.C.B. Data Table 3B1
Ref. No. Data Name
A01_01 Comment 1, 2
A01_02 P.C.B. size
A01_03 P.C.B. origin offset
A01_04 P.C.B. height offset [mm]
A01_05 Pre-Placed component thickness
A01_06 Placement mode
A01_07 P.C.B. positioning reference
A01_08 P.C.B. locate
A02 P.E.C. Recognition Data Table 3B2
Ref. No. Data Name
A02_01 P.E.C. recognition function
A02_02 P.E.C. recognition mode Global
A03 P.E.C. Recognition Mark Data Table 3B3
Ref. No. Data Name
A03_01 Mark #
A03_02 Mark Type
A03_03 Mark Size D1 [mm], D2 [mm]
A03_04 Window Size [mm]
A03_05 Mark Image
A03_06 Type Level
A03_07 Recog Algo
Refer to "(A03_08) Fiducial Marks" for detailed information on
each parameter.
A04 Setup Data Table 3B4
Ref. No. Data Name
A04_01 Conveyor width
0206-003 2-3 AHB01EDTP
1.2 Composition of Operation Data