3OM-1075-002.pdf - 第57页
Fig. 3B64 Edit Window (Provided with Multi-Layer T ray Feeder 2) The "TRA Y #2 F701-F799", "TRA Y #2 F801-F899", and "TRA Y #2 STEP" tabs are provided for the options. The tab sheet may look…
2.4 Placement Feeder Location Data
(B01) Feeder Base #1, #3, #4
It can be determined which components must be used and
which feeder base (Fdr. No.) must be loaded with the se-
lected components.
The feeder bases can be loaded with tape and vibratory stick
feeders.
(a) The following shows the positional relation between the
feeder bases.
Fig. 3B63
(b) The multi-layer tray feeder (option) or Feeder Base #2 (op-
tion) can be installed in the option space.
Check which option is installed and then create the data.
(c) Refer to the instruction manual of the multi-layer tray feeder
for the placement feeder location data of the multi-layer
tray feeder (option).
(d) Refer to the instruction manual of Feeder Base #2 (Op-
tion) for the placement feeder location data of Feeder Base
#2.
0206-002 2-37 AHB01EDTP
2.4 Placement Feeder Location Data
Fig. 3B64 Edit Window (Provided with Multi-Layer Tray Feeder 2)
The "TRAY #2 F701-F799", "TRAY #2 F801-F899", and "TRAY
#2 STEP" tabs are provided for the options.
The tab sheet may look different, depending on which options
are selected.
2.4 Placement Feeder Location Data
0308-003 2-38 AHB01EDTP
(B01_01) Fdr. No.
Shown are the feeder Nos. in the placement feeder location
data.
The numbers in ( ) indicate the feeder Nos. that will actually
be loaded with components.
Data Input Range
Feeder Base #1: 101 to 132
Feeder Base #3: 301 to 332
Feeder Base #4: 401 to 432
Fig. 3B66
The feeder Nos. (Fig. 3B64) in ( ) indicate the numbers where
the feeder No. offset in the operation data is added.
(B01_02) Component ID.
Set component IDs in the text boxes.
0206-003 2-39 AHB01EDTP
2.4 Placement Feeder Location Data
Fdr.No.
Fig. 3B65
101(101)
Fig. 3B67
Component ID.
C1005T05B0---