3OM-1075-002.pdf - 第84页

(2) Creation of Operation Data • • • • • P .E.C. Data Follow the same procedure as described in "3.1 Single Pattern". • • • • • P .E.C. Recognition Data T abl 3B22 P .E.C. recognition function Enable P .E.C. re…

100%1 / 357
3.2 Single Pattern (P.E.C. Recognition Function En-
abled)
(1) Information on Pattern Program Creation
••
••
• P.C.B. Size
Follow the same procedure as described in "3.1 Single Pattern".
••
••
• Packaged Posture and IDs of Components
Follow the same procedure as described in "3.1 Single Pattern".
••
••
• Fiducial Mark
Fig. 3B129
••
••
• Placement Coordinates & Angles and Coordinates of Fiducial
Marks
Fig. 3B130
3.2 Single Pattern (P.E.C. Recognition Function Enabled)
0206-002 2-64 AHB01EDTP
(2) Creation of Operation Data
••
••
• P.E.C. Data
Follow the same procedure as described in "3.1 Single Pattern".
••
••
• P.E.C. Recognition Data
Tabl 3B22
P.E.C. recognition function Enable
P.E.C. recognition mode Global 2 Point
P.E.C. recognition mode Image Disable
P.E.C. recognition mode Local Disable
P.E.C. recognition head Both Heads
Fiducial mark #1 X location [mm] (Horizontal) FX
1
Y location [mm] (Vertical) FY
1
Mark # 1
Fiducial mark #2 X location [mm] (Horizontal) FX
2
Y location [mm] (Vertical) FY
2
Mark # 1
••
••
• P.E.C. Recognition Mark Data
Tabl 3B23
Mark # Mark Mark Size Mark Size Window Mark Type Level Recog Algo
Type D1 [mm] D2 [mm] Size [mm] Image
1 Round 1.00 0.00 05.0 Bright High Pattern
(Normal)
••
••
• Setup Data
Create this data when the automatic setup function is used.
(3) Placement Feeder Location
Follow the same procedure as described in "3.1 Single Pattern".
3.2 Single Pattern (P.E.C. Recognition Function Enabled)
0206-002 2-65 AHB01EDTP
(4) Placement Data (P-data) U01
••
••
• Unit Control
Follow the same procedure as described in "3.1 Single Pattern".
••
••
• Unit P.C.B. Fiducial
Follow the same procedure as described in "3.1 Single Pattern".
••
••
• Placement Data (P-data)
Follow the same procedure as described in "3.1 Single Pattern".
(5) Placement Data (O-data) U01
Do not create this data.
3.2 Single Pattern (P.E.C. Recognition Function Enabled)
0206-002 2-66 AHB01EDTP