3OM-1075-002.pdf - 第20页

1. Outline of Pattern Program 1 . 1 Composition of Pattern Program The pattern program is composed of the following data. Pattern Program (Section 2) Pattern Program Name (2.2) Operation Data (2.3) P .C.B. Data (A01) P .…

100%1 / 357
0107-001 2-B AHB01EDTP
1. Outline of Pattern Program
1.1 Composition of Pattern Program
The pattern program is composed of the following data.
Pattern Program (Section 2)
Pattern Program Name (2.2)
Operation Data (2.3) P.C.B. Data (A01)
P.C.B. Recognition Data (A02)
P.C.B. Recognition Mark Data (A03)
Setup Data (A04)
Placement Feeder Location (2.4) Feeder Base #1 (B01)
Feeder Base #3 (B01)
Feeder Base #4 (B01)
Tray #2 F701-F799 (Option)
Tray #2 F801-F899 (Option)
Tray Step (Option)
FB #3 VIB Feeder #1 (B02)
FB #3 VIB Feeder #2 (B02)
FB #3 VIB Feeder #3 (B02)
FB #4 VIB Feeder #1 (B02)
FB #4 VIB Feeder #2 (B02)
FB #4 VIB Feeder #3 (B02)
Component ID
Component Library
Placement Data (2.5)
Placement Data U01 (C01) P-data (C02)
Placement Data U02 (C01) O-data (C03)
Placement Data Un (C01)
(a) "(2.2) through (2.5)", "(A01) through (A04)", "(B01)", "(B02)",
and "(C01) through (C03)" show the item Nos. to be referred
to.
(b) The above hierarchical sequence is based on the selection
of the multi-layer tray feeder (option).
Fig. 3B1 Composition of Pattern Program
1. Outline of Pattern Program
01 12-002 2-1 AHB01EDTP
1.1.1 Outline of Various Data
The pattern program is composed of the following data.
Operation Data : This data is used to generally manage
the pattern program data.
Placement Feeder Location : This data is used to set parameters
which determine a component ID
(type) to be allocated to each feeder
slot No. (Fdr. No.).
Placement Data : The set parameters (designation of
coordinates and direction) are used for
placement of components allocated in
the placement feeder location data.
1.1.2 Input Procedure of Each Data
Refer to "4. "Pattern Program" Edit Window" for detailed information on
how to enter each parameter.
After entering each parameter, using the network terminal (option), send
it to the main machine.
Pattern Program Data Sheets
Make use of the pattern program data sheets described in "Sec-
tion 6".
0206-002 2-2
AHB01EDTP
1.1 Composition of Pattern Program