3OM-1075-002.pdf - 第165页
AHB01EDTP 3 . 3 "Recognition Data" T ab • • • • • Sheet Layout When the "Recognition Data" tab is pressed, the "Recognition Data" tab sheet appears. The "Recognition Data" tab shee…
AHB01EDTP
0206-003 3-29
3.2 "Shape Data" Tab
*3 Extended setting
Depending on which ("Disable" or "Enable") is selected in the "Ex-
tended setting" text box, different items appear in "*4", "*7", and "*8".
Disable
Nothing appears in "*4".
"# of Rows [pcs.]", "# of Cols [pcs.]", "Row Pitch [mm]", and "Col
Pitch [mm]" appear in "*7".
Nothing appears in "*8".
Enable
"# of types" appears in "*4".
"Type No.", "Grp Posn X [mm]", "Grp Posn Y [mm]", "# of Rows
[pcs.]", "# of Cols [pcs.]", "Row Pitch [mm]", "Col Pitch [mm]", "Miss-
ing Elctd Set", and "# of Missing" appear in "*7".
"Elctd Grp No.", "Missing Elctd No.", "Missing Stg Row", "Missing
Stg Col", "# of Missing Rows [pcs.]", and "# of Missing Cols [pcs.]"
appear in "*8".
*4 # of types, *5 # of groups, *6 Elctd Type #1
*7 Electrode Group Data
Type No., Grp Posn X [mm], Grp Posn Y [mm], # of Rows [pcs.],
# of Cols [pcs.], Row Pitch [mm], Col Pitch [mm], Missing Elctd
Set, # of Missing Blocks
*8 Electrode Missing Data
Elctd Grp No, Missing Elctd No., Missing Stg Row, Missing
Stg Col, # of Missing Rows [pcs.], # of Missing Cols [pcs.]
AHB01EDTP
3.3 "Recognition Data" Tab
••
••
• Sheet Layout
When the "Recognition Data" tab is pressed, the "Recognition Data"
tab sheet appears.
The "Recognition Data" tab sheet can be classified by shapes and
divided into five kinds as follows.
• "Recognition Data" Tab Sheet
(Cylindrical, Square, Deform (Simple), Deform (Complex))
• "Recognition Data" Tab Sheet
(IC (Simple), IC (Complex))
• "Recognition Data" Tab Sheet
(Connector (Simple), Connector (Complex))
• "Recognition Data" Tab Sheet
(Other Leaded (Simple), Other Leaded (Complex))
• "Recognition Data" Tab Sheet
(BGA/CSP)
3.3.1 Cylindrical, Square, Deform (Simple), and Deform (Com-
plex)
Fig. 3C20 "Recognition Data" Tab Sheet ("Cylindrical" Selected)
3.3 "Recognition Data" Tab
*1
*2
*3
*4
*5
*6
*7
0308-003 3-30
AHB01EDTP
••
••
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" in "Section 2" for the
detailed information on how to enter parameters.
(1) Component shape: Cylindrical, Square, Deform (Simple)
*1 Lighting system, *2 Recognition data set, *3 Recognition
level, *4 Back ltg recog algo (Front ltg recog algo), *6 View
range set
"Back ltg recog algo" or "Front ltg recog algo" appears in *4
according to the parameter selected in the "Lighting sys-
tem" text box.
*5 Lighting pattern
Back ltg, Front ltg (Up), Front ltg (Mid), Front ltg (Dn)
When "Manual" is set in the "Lighting pattern" text box, it is required
to enter parameters in these text boxes.
*7 Mold size tolerance set
Mold size tolerance X [mm], Mold size tolerance Y [mm]
When "Manual" is set in the "Mold size tolerance set" text box, it is
required to enter parameters in these text boxes.
3.3 "Recognition Data" Tab
0308-004 3-31