operation-cp45.pdf - 第127页
Structur e of MMI Menu 7-3 information. 7.1.2.4. Main menu tool-bars 7.1.2.4.1. The submenu tool-bars of the PCB Edit menu tool-bar Board Register various information on the board to be produced. Part Register variou…
Samsung Component Placer CP-45F(V)/FS Operations Manual
7-2
7.1.2. Summary of functions
This section includes information on all the menus that are displayed on the MMI main
screen.
7.1.2.1. File command submenus
New
Used to create a new PCB file.
Open
Used to edit an existing PCB file.
Save
Used to save an opened file.
Save As
Used to save an opened file under a different name.
Merge Part Library
Use it to compare the Part Library of another equipment with that of current
equipment and merge.
Recent File
Displays a list of files worked on recently.
Exit
Ends MMI session and goes back to Windows or terminates the operation of the
equipment.
7.1.2.2. View command submenus
Manual Tool
Enables manual operation of equipment.
Current position
Displays the current position and nozzle name of each axis in real time.
System Error Message
Checks the error message window, which is displayed when there is an equipment
error.
Dump Information (Place Error)
Displays the status of dumped parts during equipment operation.
Tool bar Position
Sets the position of Menu Tool bar on the screen.
Mark3 TSG
Shows the error occurred during equipment operation.
7.1.2.3. Help command submenus
About CP-45FV
Displays the equipment's application program's current version and miscellaneous
Structure of MMI Menu
7-3
information.
7.1.2.4. Main menu tool-bars
7.1.2.4.1. The submenu tool-bars of the PCB Edit menu tool-bar
Board
Register various information on the board to be produced.
Part
Register various information about the components to be placed.
Feeder
Sets the data related to the Tape, Stick, and Tray Feeder.
Step
Defines the step for placement operation.
ANC Cfg
Shows the nozzle information when the nozzles of the previous PCB file and current
system ANC are different.
Cycle
Checks the cycle by step.
Opti
Executes Optimizer.
Cancel
Closes the dialog box for the Board, Part, Feeder, and Step.
7.1.2.4.2. The submenu tool-bars of the production menu tool-bar
Start
Starts operation after downloading PCB.
Stop
Stops operation.
Continue Mount Operation
Continues previous operation.
Finish
Finishes the downloaded operation completely.
Tray Feeder Remained Part Count
Sets the position of the pocket to start picking up components from the Tray Feeder.
PCB Data Down Load To VME
Transmits PCB operation data to the equipment. It is possible only when the
equipment status is 'Finish'.
Placement Information
Checks the number of pickups, placements, and pickup error rates by head, nozzle,
and feeder.
Status Information
Samsung Component Placer CP-45F(V)/FS Operations Manual
7-4
Checks the overall operation of the System.
7.1.2.4.3. The submenu tool-bars of the Utility menu tool-bar
Print
Used to print a PCB file or system data.
Product Information Manager
Displays various production management data for the equipment(total time,
placement information, and error information).
Copy Between PCB Files
Use it to copy the existing PCB file data to other PCB files.
File Manager
Use it to copy, delete, rename and clear the files related to MMI.
By Pass
Use it to bypass a PCB on the conveyor without placement operation.
Warmup
Warms up the driving axis after power supply.
7.1.2.4.4. The submenu tool-bars of the Diagnosis menu tool-bar
I / O
Check the I/O status.
Conveyor
Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.
Light
Checks the Camera Light.
Vacuum
Checks the Vacuum of each head
Jogbox
Checks the Jogbox function.
Tray Feeder Communication
Checks the Tray Feeder function.
7.1.2.4.5. The submenu tool-bars of the Sys. Setup menu tool-bar
Head
Displays and sets the status of Head Block.
Limit
Sets the position limit for each axis to move.
Head Device Offset
Sets the offset value between each device of the Head Block.
Offset
Sets the offset value between each device of the Head Block and the mount offset