operation-cp45.pdf - 第210页

Samsung Component Placer CP-45F(V)/FS Operations Manual 11-56  <Light Control> button Set the light for the camera to recognize the component.  <Size> group Set the align size.  <X Lead Num> edit box…

100%1 / 324
PCB Edit Command
11-55
Set the height for recognition. Based on the component surface, if the top is to be
recognized, set - value and if the bottom is to be recognized, set + value.
<Option> group
Set the align option data.
<Area Margin> edit box
Set the limit for the image to be off the center of the screen when the component
is recognized. For example, if this value is 5mm, the component image should be
within 5mm of the center of the screen.
<Tolerance Tangential> edit box
Set the allowable tolerance when the lead is pushed to the side. Set it as a
percentage against <Lead Pitch>.
<Outline> button
Displays the outline of the component on the vision monitor by using the set align
data.
<Move…> button
Performs component pickups or moves to the fix camera.
<Test> button
Tests component recognition by using the set align data.
<Auto Teach> button
Finds out the component align data automatically.
11.1.11. QFP component data setting
Set the align data for QFP components.
Figure 11-36 “Align Type = Vision, Package Group = QFP” dialog box
<Camera No.> combo box
Select the camera to recognize the component.
Samsung Component Placer CP-45F(V)/FS Operations Manual
11-56
<Light Control> button
Set the light for the camera to recognize the component.
<Size> group
Set the align size.
<X Lead Num> edit box
Set the number of leads in X direction.
<Y Lead Num> edit box
Set the number of leads in Y direction
<Total X> edit box
Displays the size of the whole component in X direction. When the <Body X>
and <Lead Length> are determined, it is calculated and displayed. ( <Body X> +
<Lead Length> * 2 )
<Total Y> edit box
Displays the size of the whole component in Y direction. When <Body Y> and
<Lead Length> are determined, it is calculated and displayed. ( <Body Y> +
<Lead Length> * 2 )
<Body X> edit box
Set the size of component body in X direction.
<Body Y> edit box
Set the size of component body in Y direction.
<Lead Width> edit box
Set the width of lead.
<Lead Pitch> edit box
Set the lead pitch.
<Lead Foot> edit box
Set the length of the lead that touches the surface.
<Lead Length> edit box
Set the length of the lead shown in the align camera.
<Align Z> edit box
Set the height for recognition. Based on the component surface, if the top is to be
recognized, set - value and if the bottom is to be recognized, set + value.
<Option> group
Set the align option data.
<Area Margin> edit box
Set the limit for the image to be off the center of the component when the
component is recognized. For example, if this value is 5mm, the component
image should be within 5mm from the center of the screen.
<Tolerance Tangential> edit box
Set the allowable tolerance when the lead is pushed to the side. Set it in
percentage against <Lead Pitch>.
<Outline> button
Displays the outline of the component on the vision monitor by using the set align
PCB Edit Command
11-57
data.
<Move…> button
Performs component pickups or moves to the fix camera.
<Test> button
Tests component recognition by using the set align data.
<Auto Teach> button
Finds out the component align data automatically.
11.1.12. PLCC component data setting
Set the align data for PLCC components.
Figure 11-37 “Align Type = Vision, Package Group = PLCC” dialog box
<Camera No.> combo box
Select the camera to recognize the component.
<Light Control> button
Set the light for the camera to recognize the component.
<Size> group
Set the align size.
<X Lead Num> edit box
Set the number of leads in X direction.
<Y Lead Num> edit box
Set the number of leads in Y direction.
<Total X> edit box
Set the size of the whole component in X direction.
<Total Y> edit box