operation-cp45.pdf - 第142页
Samsung Component Placer CP-45F(V)/FS Operations Manual 9-2 Figur e 9-2. “ Manual T ools – Axis Movi ng ” dial og box Axis combo box Select the axis to move. A vailable axes are as follows. XY : Selects XY axis. Z: Sel…
View Commands
9-1
Chapter 9. View Commands
The <View> command is composed of the six submenus: Manual Tool, Current Position,
System Error Message, Dump Information, Tool bar Position, Mark3TSG.
When a submenu of <View> command is selected, check mark() appears in front of the
submenu (except for some commands), and the corresponding message box is displayed
on the main screen. If the menu is selected again, the check mark disappears and the
corresponding message box also closed.
Figure 9-1. View Menu and Submenus
9.1. Manual Tool
Executes a manual operation of the equipment. When this command is selected, the
following dialog box is displayed.
9.1.1. Axis Moving Dialog Box
Used to move or to read in the current position of each axis.
Samsung Component Placer CP-45F(V)/FS Operations Manual
9-2
Figure 9-2. “Manual Tools – Axis Moving” dialog box
Axis combo box
Select the axis to move. Available axes are as follows.
XY: Selects XY axis.
Z: Selects the Z axis of the head.
R: Selects the R axis of the head.
Mirror: Selects the mirror axis of the fly camera.
Width: Selects the axis of the conveyor width.
<Head Device> combo box
To move to the axis selected in the <Axis> combo box or to read in the position,
select the corresponding device. Available devices are as follows.
Move Cam: Selects Teaching Camera.
Head1: Selects Head1.
Head2: Selects Head2.
Head3: Selects Head3.
Head4: Selects Head 4.
Head5: Selects Head5.
Head6: Selects Head6.
Beam: Selects Beam.
<Speed Level> group
View Commands
9-3
Select the speed level for axis transfer.
Available speed levels are as follows.
1: Selects the fastest level of speed. (Fastest)
2: Selects the fast level of speed. (Fast)
3: Selects the middle level of speed. (Middle)
4: Selects the slow level of speed. (Slow)
5: Selects the slowest level of speed. (Slowest)
<Position> group
To move the axis or to read in the position of the current axis, display the position
value. The displayed position value differs according to the axis selected in <Axis>.
The position values are as follows.
X: The position value of X axis
Y: The position value of Y axis
<Origin> combobox
To move or to read in the current position of the axis, select the origin. Available
origins are as follows.
Machine Logical: Selects the origin of the equipment as the origin.
FeederBase Front (1): Selects the origin of the front feeder base as the origin.
FeederBase Rear (2): Selects the origin of the rear feeder base as the origin.
PCB Bad Mark: Selects the bad mark of the PCB as the origin.
PCB Array#1: Selects the origin of the Array PCB1 as the origin.
Tray Feeder #1: Selects the origin of the Tray Feeder1 as the origin.
Tray Feeder #2: Selects the origin of Tray Feeder2 as the origin.
ANC#1: Selects the origin of ANC1 as the origin.
ANC#2: Selects the origin of ANC2 as the origin.
<Message>
Displays the information generated during the manipulation of axis.
<Move> button
Moves the axis to the value specified in the <Position> group.
<Get> button
Reads in the position of the current axis and displays it in the <Position> group.