operation-cp45.pdf - 第296页

Samsung Component Placer CP-45F(V)/FS Operations Manual 15-10 Figur e 15-8. “ Sys. Setup : T ray Feeder Setting ” dialog box  <Select> option button Select the tray feeder unit. A vailable tray feeder units are 1 …

100%1 / 324
Sys.Setup Command
15-9
Displays the direction of conveyor movement. To change the direction of
conveyor movement, please contact this equipment manufacturer.
<Conveyor Type> combo box
Displays the type of the conveyor. To change the type of the conveyor, please
contact this equipment manufacturer.
<AutoMatic Conveyor Width Adjust – Initial Width> edit box
When the conveyor width is adjusted automatically, set the initial value of
conveyor width.
<AutoMatic Conveyor Width Adjust – Width Margin> edit box
Set the tolerance for conveyor width.
<Device> combo box
To move or to read in the positions of the XY and Z axes, select the corresponding
device. Available devices are as follows.
Move Cam: Selects Teaching Camera.
Head1: Selects Head1.
Head2: Selects Head2.
Head3: Selects Head3.
Head4: Selects Head4.
Head5: Selects Head5.
Head6: Selects Head6.
<Move> button
Moves the XY, and Z axes to the device selected in <Device>. At this time, the edit
box corresponding to the position to move to must be clicked on with a mouse.
<Get> button
Reads in the current position of the XY and Z axes of the device selected in <Device>.
At this time, the edit box corresponding to the position to be read must be clicked on
with a mouse.
<Update> button
Transmits the set data to the equipment and closes the dialog box.
<Cancel> button
Ignores the set data and closes the dialog box.
15.6. Tray [F6]
Sets the data on the tray feeder.
When this button is selected, the following dialog box is displayed.
Samsung Component Placer CP-45F(V)/FS Operations Manual
15-10
Figure 15-8. “Sys. Setup : Tray Feeder Setting” dialog box
<Select> option button
Select the tray feeder unit. Available tray feeder units are 1 – 4.
<Name> edit box
Set the name of the selected tray feeder unit.
<Type> combo box
Select the type of the set tray feeder unit. Available types are as follows.
Single Tray: Tray to be installed on the feeder base.
FW-20F: Tray consists of 20 step Palette, it communicates with the equipment
through RS-232C.
FW-20S: Tray consists of 20 step Palette, it communicates with the equipment though
RS-232C.
NONE: Means no tray is installed.
<Origin> group
Set the origin of the selected tray feeder unit. This origin is the offset value from the
equipment origin.
<Communication> group
Set the data related to RS-232C communication.
<Channel> combo box
Select the RS-232C communication channel. Two channels are available for the
equipment.
<Comm. ID> combo box
Select the communication ID. Available IDs are 1 – 3.
<Not Usable Lane> group
Sys.Setup Command
15-11
To use the selected tray feeder unit, set the feeder base unit and slot taken up by the
corresponding tray.
<Feeder Base> combo box
Select the feeder base. In the case of the CP45FV model, available feeder bases
are Front( front Feeder Base), and Rear( rear Feeder Base).
<Lane> edit box
Set the slot of the feeder base.
<Fiducial> button
At the moment, it does not have a function.
<Device> combo box
To move or to read in the positions of the XY and Z axes, select the corresponding
device. Available devices are as follows.
Move Cam: Selects Teaching Camera.
Head1: Selects Head1.
Head2: Selects Head2.
Head3: Selects Head3.
Head4: Selects Head 4.
Head5: Selects Head5.
Head6: Selects Head6.
<Move> button
Moves the XY and Z axes with the device selected in <Device>. At this time, the edit
box corresponding to the position to move to must be clicked on with a mouse.
<Get> button
Reads in the XY and Z axis of the device selected in <Device>. At this time, the edit
box corresponding to the position to be read must be clicked on with a mouse.
<Update> button
Transmits the set data to the equipment and closes the dialog box.
<Cancel> button
Ignores the set data and closes the dialog box.
15.7. Dump [F7]
Sets the data on the dump box where the picked up components are dumped.
When this button is clicked on, the following dialog box is displayed..