operation-cp45.pdf - 第286页
在线预览 operation-cp45.pdf PDF 文档。
Diagnosis Command
14-11
Displays the status of command handling.
<Execution Time> Static box
Displays the time taken to handle the command.
Sys.Setup Command
15-1
Chapter 15. Sys.Setup Command
The Sys. Setup command is composed of ten submenus: Head, Limit, Offset, Mount
Offset, Origin, Dump, Tray, Camera, Pref., and Device.
This command is used to check and change the various set up status of the equipment.
When the set up status is set improperly, it could cause dangerous situations during
equipment operation. To prevent improper handling by unauthorized personnel, a
password must be entered.
When a submenu of the <Sys. Setup> command is selected, corresponding dialog box is
displayed on the screen. While the corresponding dialog box is displayed, selecting the
menu once more activates the dialog box.
Figure 15-1. When the Sys. Setup Command is Selected
Figure 15-2. Submenus of the Sys. Setup command
15.1. Head [F2]
The <Head> command displays and sets the status of the head block.
When this button is clicked on, the following dialog box is displayed.
Warning
Changing the set up status by an unauthorized user could
damage the machine or result in personal injury.
Unauthorized user must not change the set up status of
the machine.