operation-cp45.pdf - 第270页

Samsung Component Placer CP-45F(V)/FS Operations Manual 13-4 Figur e 13-5. “ Open ” dialog box 13.4. File Man…[F5] Figur e 13-6. “ File Ma nager ” dialog box  <Send T o A:> button Copies the selected file on a flo…

Utility Command

13-3

13.2. Pd. Info[F3]

Displays the production management data.

13.3. Copy…[F4]

The <Copy data between PCB files> command performs the similar function as

the<Browse> function of the <New> command, but it does not create a new PCB file. A

preexisting file is copied to a designated PCB file.

When the <Copy data between PCB file> command is selected, the following dialog box

is displayed.

Figure 13-4. “Copy data between PCB files” dialog box

 <Source File> edit box

The source file to be copied. The source file name can be selected by entering the

name of the source file directly or by clicking on the <Browse...> button on the right.

 <Browse…> button

Displays the location of the source file to be copied. When this button is clicked on,

the following dialog box is displayed.

Samsung Component Placer CP-45F(V)/FS Operations Manual

13-4

Figure 13-5. “Open” dialog box

13.4. File Man…[F5]

Figure 13-6. “File Manager” dialog box

 <Send To A:> button

Copies the selected file on a floppy disk.

 <Copy> button

Makes a copy of the selected file and as the original file exists under its original name,

saves the copied file under a different file name when using the copy command.

 <Move> button

Moves the selected file to the specified directory.

 <Delete> button

Deletes the selected file.

 <Rename> button

Renames the selected file

Utility Command

13-5

 <Clear> button

If the file size of a *.log file is very big, deletes the data saved previously.

13.5. Bypass[F8]

The < Bypass> command is used to bypass a PCB on the conveyor without carrying out

placement operation. When this command is selected, the following dialog box is

displayed and shows it is in the PCB Bypass status.

If the head is above the conveyor, the PCB sensing sensor gets affected. Therefore, move

the head out of the conveyor and execute the command.

Figure 13-7. “By-pass Operation” dialog box

When the <Start> switch on the main body of this equipment is pressed, starts the PCB

bypass operation. When the <Stop> switch or <Reset> switch on the main body of this

equipment is pressed, cancels the PCB bypass operation status and closes the dialog box

13.6. WarmUp[F9]

The <WarmUp> command is used to warm up each axis after power supply. When this

command is selected, the following dialog box is displayed.