operation-cp45.pdf - 第15页
Pr eface vii Disconnect powe r and air before maintenance or repair . Caution: Safety Colors and Contrast Colors Combination of Safety yellow and black may be used to indicate temporary or p ermanent risk locations. – lo…
Samsung Component Placer CP-45F(V)/FS Operations Manual
vi
Rear View of the Machine
The following labels are attached on the rear part of this machine.
Figure 0-2. Safety labels attached on the rear part of the machine
Do not put a hand in during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the use
r
disassembles any part or open the cover when
the moving part is maneuvering.
Stop the machine before servicing.
Stop the machine before repair or maintenance
or error troubleshooting.
If the cover is removed from the area
where this label is attached, it could
result in an electric shock.
When it is necessary to remove the
cover for repair or maintenance,
disconnect power, wait a little while, and
remove the cover.
Preface
vii
Disconnect power and air before
maintenance or repair.
Caution: Safety Colors and Contrast Colors
Combination of Safety yellow and black may be
used to indicate temporary or permanent risk
locations. – locations where there is moving
part(Conveyor).
Samsung Component Placer CP-45F(V)/FS Operations Manual
viii
Internal Part of the Machine
The following labels are attached on the internal part of this machine.
Figure 0-3. Safety labels attached on the internal part of the machine
Be careful of electric shocks. (Keep Out).
Be sure to disconnect power source before
maintenance or repair since it could cause fatal
injuries. And be careful of residual current.