operation-cp45.pdf - 第318页

Samsung Component Placer CP-45F(V)/FS Operations Manual 15-32  <Cancel> button Ignores the data and closes the screen.

Sys.Setup Command

15-31

Figure 15-18. “Sys. Setup : Standard Device – Nozzle” dialog box

 <1. Nozzle Type> list box

Select the nozzle type to set.

 <2. Name> edit box

Set the name of the selected nozzle.

 <3. Desc> edit box

Set the explanation on the selected nozzle.

 <4. Dimension - Length> edit box

Set the nozzle length.

 <5. Vacuum – Pick Vacuum> edit box

Set the vacuum pressure level to be used as the criteria to determine whether

component pickups is successful or not after component pickups with a percentage.

 <

5. Vacuum – Stuff Vacuum> edit box

Set the vacuum pressure level to be used as the criteria to determine whether there is

any foreign material in the nozzle or not before component pickups with a percentage.

 <5. Vacuum – Vacuum Range> edit box

Set the vacuum range for the percentages of Pick Vacuum, and Stuff Vacuum .

 <OK> button

Saves the data and closes the screen.

Warning

Changing the set up status by an unauthorized user could

damage the machine or result in personal injury.

Unauthorized user must not change the set up status of the

machine.

Samsung Component Placer CP-45F(V)/FS Operations Manual

15-32

 <Cancel> button

Ignores the data and closes the screen.

ANC Command

16-1

Chapter 16. ANC Command

The ANC command performs functions related to ANC setting including the arrangement

of nozzles on the ANC(Auto Nozzle Changer), nozzle pickups, and attachment. When

this button is clicked on, the following dialog box is displayed.

Figure 16-1. “ANC Setting…” dialog box

 <Select> option button

Select the ANC number to set.

 <Different ANC Info.In Current PCB file> list box

현재 Load 된 PCB 파일상의 ANC 설정과 현재 작업 중인 장비 System 상의

ANC 설정의 차이를 보여줍니다. PCB 파일상의 설정으로 System 설정을 변

경하려면 우측의 <PCB->System> 버튼을 클릭하고 설정이 다른 홀의 노즐

들을 설정에 맞게 교환해 주십시오.

 <

Device> combo box

경 고

수동으로 Nozzle 을 배치할 경우 <Shutter On/Off>버튼을

이용하여 Shutter 를 Open 하고 장비 전/후면 조작판넬의

<EMG> 스위치를 누른 후, 수동으로 Nozzle 을 배치하고

<EMG> 스위치를 해제하고 <Reset>스위치를 눌러 주십

시오. 위의 절차를 무시하면 상해를 입을 수 있습니다.