operation-cp45.pdf - 第129页

Structur e of MMI Menu 7-5 value of the equipment.  Origin Sets the origin of each component of the equipment.  T ray Feeder Setup Sets the data related to the T ray Feeder .  Dump Sets the data related to the Dump Bo…

Samsung Component Placer CP-45F(V)/FS Operations Manual

7-4

Checks the overall operation of the System.

7.1.2.4.3. The submenu tool-bars of the Utility menu tool-bar

 Print

Used to print a PCB file or system data.

 Product Information Manager

Displays various production management data for the equipment(total time,

placement information, and error information).

 Copy Between PCB Files

Use it to copy the existing PCB file data to other PCB files.

 File Manager

Use it to copy, delete, rename and clear the files related to MMI.

 By Pass

Use it to bypass a PCB on the conveyor without placement operation.

 Warmup

Warms up the driving axis after power supply.

7.1.2.4.4. The submenu tool-bars of the Diagnosis menu tool-bar

 I / O

Check the I/O status.

 Conveyor

Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.

 Light

Checks the Camera Light.

 Vacuum

Checks the Vacuum of each head

 Jogbox

Checks the Jogbox function.

 Tray Feeder Communication

Checks the Tray Feeder function.

7.1.2.4.5. The submenu tool-bars of the Sys. Setup menu tool-bar

 Head

Displays and sets the status of Head Block.

 Limit

Sets the position limit for each axis to move.

 Head Device Offset

Sets the offset value between each device of the Head Block.

 Offset

Sets the offset value between each device of the Head Block and the mount offset

Structure of MMI Menu

7-5

value of the equipment.

 Origin

Sets the origin of each component of the equipment.

 Tray Feeder Setup

Sets the data related to the Tray Feeder.

 Dump

Sets the data related to the Dump Box.

 Camera

Sets various data on the Camera and executes camera calibration.

 Preference

Sets various options necessary for equipment operation.

 Device

Manages data related to the Tape, Stick, and Nozzle.

7.1.2.4.6. ANC menu tool-bar

7.1.2.5. Methods for selecting a command

Figure 7-2. MMI main screen

The methods for selecting a command are as follows;

 When the icon is displayed, click on the desired icon.

 Display pull down menu and click on the command.

Samsung Component Placer CP-45F(V)/FS Operations Manual

7-6

 When the pull down menu is displayed, enter the underlined letter of each command

using the keyboard.

 Use shortcut keys. When the command is underlined, press Alt + the underlined letter,

and the cursor moves to that position or executes the command.

For the command that is marked Ctrl (or Alt)+□ after the pull down menu command,

shortcut keys can be used. The shortcut key is a method to select a command directly

without using the cursor by pressing Ctrl (or Alt) key together with the designated key

simultaneously. In this manual, shortcut key is indicted by a “[ ]” after the command.

Example: New [Ctrl+N]

Memo