operation-cp45.pdf - 第313页
Sys.Setup Command 15-27 Based on the slot in which the tape feeder is installed, select the number of pushers on the right of the corresponding slot. <3. Pusher [Front Side Referenced] – Pusher Map> check box Set…
Samsung Component Placer CP-45F(V)/FS Operations Manual
15-26
15.10. Device [F10]
Controls the data related to the tape, stick, and nozzle. When this button is selected, the
following dialog box is displayed.
Figure 15-15. “Sys. Setup : Standard Device - Tape” dialog box
<1. Device List> list box
Select the device to set.
The above screen is the case where the “Tape” is selected in the Device list.
Set the data on the tape feeder.
<1. Tape Type> list box
Select the tape feeder type to set.
<2. Default Push Count> combo box
Select how many times the pusher should be operated to move forward the tape
feeder.
<3. Pusher [Front Side Referenced] – Left Pusher Number> combo box
Set the number of pushers to be operated to move forward the tape feeder.
Based on the slot in which the tape feeder is installed, select the number of pushers
on the left of the corresponding slot.
<3. Pusher [Front Side Referenced] – Right Pusher Number> combo box
Set the number of pushers to be operated to move forward the tape feeder.
Warning
Changing the set up status by an unauthorized user
could damage the machine or result in personal injury.
Unauthorized user must not change the set up status of
the machine.
Sys.Setup Command
15-27
Based on the slot in which the tape feeder is installed, select the number of pushers
on the right of the corresponding slot.
<3. Pusher [Front Side Referenced] – Pusher Map> check box
Set the pusher to be operated to move forward the tape feeder.
When the check box is checked, operates the corresponding pusher.
Next is a figure showing the relationship between the pusher data and the actual
pusher to operate. The solid black circles in the figure indicate the pushers to operate.
1) When Left Pusher = 0 and Right Pusher = 0
R2R1SlotL1L2
피
더
2) When Left Pusher = 1 and Right Pusher = 1
R2R1SlotL1L2
피
더
3) When Left Pusher = 2, Right Pusher = 1
FEEDER
FEEDER
Samsung Component Placer CP-45F(V)/FS Operations Manual
15-28
R2R1SlotL1L2
피
더
<4. Timing – Open Time> edit box
Time needed to open the shutter of the tape feeder.
<4. Timing – Feeding Time> edit box
Time needed to feed the tape feeder.
<5. Pickup Offset - X> edit box
Set the X offset value of the pickups point position of the tape feeder.
Based on the setting of the tape feeder in the front of the equipment, set the offset
value of the pickups point of other feeders against the pickups point of the 8mm tape
feeder.
<5. Pickup Offset - Y> edit box
Set the Y offset value of the pickups point position of the tape feeder.
<5. Pickup Offset - Z> edit box
Set the Z offset value of the pickups point position of the tape feeder.
<6. Width - Left> edit box
Set the left width of the tape feeder.
<6. Width - Right> edit box
Set the right width of the tape feeder.
Next screen is the case where the “Stick” is selected in the Device list.
Set the data on the stick feeder.
FEEDER