CM602all_EJM8AESM_Service Manual.pdf - 第1005页
Tray Direct Tray Remark Item (9) Press [Jig remove]. (10) Turn off (O) the servo switch. (11) Open the safety cover. (12) Remove the nozzle from the head. (5) Close the safety cover. (6) Turn on (I) the servo switch. 5 R…
(1) Select [Tray feeder] from the
machine parameter teach menu. Press
[Jig setting].
(2) Turn off (O) the servo switch.
(3) Open the safety cover.
(4) Put Nozzle 1003 on Head 1.
(5) Close the safety cover.
(6) Turn on (I) the servo switch.
(7) Press [Height teach].
• Height teaching will be performed.
(8) Press [Position teach].
• Position teaching in the X and Y
directions will be performed.
Carry out machine parameter teaching.
Main menu/Machine parameter teach/Tray feeder
Height teaching
Position teaching
Remark
Direct Tray
2
1
Put the jig on.
Item
Carry out machine parameter teaching.
Tray
3
4
EJM8A-E-SMA070202-A01-00
Page 7-2-2-2
Tray Direct Tray
RemarkItem
(9) Press [Jig remove].
(10) Turn off (O) the servo switch.
(11) Open the safety cover.
(12) Remove the nozzle from the head.
(5) Close the safety cover.
(6) Turn on (I) the servo switch.
5
Remove the jig.
EJM8A-E-SMA070202-A01-00
Page 7-2-2-3
Direct Tray
• This section describes the procedures for positioning the magazine shutter stopper.
Part Weight
7-2-3 Positioning the Magazine Shutter Stopper
Tool
Phillips screwdriver #2
Allen keys
Level
Teaching
Assembly/AdjustmentRemoval/Disassembly
30
kgs.
30
Min.
Jig FM-1924
Min.Min. Min.
Tray
Jig
FM-1924
Caution
Danger
Warning
EJM8A-E-SMA070203-A01-00
Page 7-2-3-1