CM602all_EJM8AESM_Service Manual.pdf - 第821页
Remarks Component-Thickness-Measuring Unit Item Option Part and Accessory Replacement Allen key M6 M6 x 60L ( 2 pcs.) Remove the cover. Phillips screwdriver #2 Cut off the cable tie. Nipper Remove the amplifier. 5 6 8 7 …
Remarks
Turn off the air and power supply.
Remove the feeder cover.
Allen key 3 mm
Screw M4 4 pcs.
Remove the amplifier connector.
Remove the I/O link cable connector.
Component-Thickness-Measuring Unit
Item
1
2
3
4
Option Part and Accessory Replacement
1
2
Remove the amplifier connector.
Remove the I/O link cable connector.
EJM8A-E-SMA060404-A01-00
Page 6-4-4-2
Remarks
Component-Thickness-Measuring Unit
Item
Option Part and Accessory Replacement
Allen key M6
M6 x 60L ( 2 pcs.)
Remove the cover.
Phillips screwdriver #2
Cut off the cable tie.
Nipper
Remove the amplifier.
5
6
8
7
Remove the component-thickness-sensor unit.
Loosen the two M6 x 60L bolts and remove the unit.
Cut off the cable tie.
(1) Pull.
(2) Raise.
Loosen the two M4 screws. Remove the cover.
EJM8A-E-SMA060404-A01-00
Page 6-4-4-3
Remarks
Component-Thickness-Measuring Unit
Item
Option Part and Accessory Replacement
Open the amplifier cover.
Open the connector lock.
Open the new amplifier cover.
10
11
9
12
Remove the sensor cables from the amplifier connector lock.
Open the amplifier cover.
Open the
connector lock.
Remove the sensor cables
from the amplifier connector lock.
Open the new amplifier cover.
EJM8A-E-SMA060404-A01-00
Page 6-4-4-4