CM602all_EJM8AESM_Service Manual.pdf - 第730页
Optional Accessory Parts Replacement Remarks Item Nozzle Changer Unit (8-nozzle type) Lock the valve. 5-000017 Allen key 2.5 mm Screw M3 2 pcs. Connect the air tubes and the connectors. 5-000036 Put the feeder cover back…
Optional Accessory Parts Replacement
Remarks
Switch off the main power and air supply.
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the connectors and the air tubes from the valve.
5-000036
Before removing, put marks on the
connectors and the air tubes so as not to
confuse 'Open' and 'Close' when putting
them back on.
Remove the valve holding screws.
Replace the valve. Allen key 2.5 mm
Screw M3 2 pcs.
3
4
1
Item
2
Nozzle Changer Unit (8-nozzle type)
1
2
EJM8A-E-SMA060102-A01-00
Page 6-1-2-2
Optional Accessory Parts Replacement
Remarks
Item
Nozzle Changer Unit (8-nozzle type)
Lock the valve.
5-000017
Allen key 2.5 mm
Screw M3 2 pcs.
Connect the air tubes and the connectors.
5-000036
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
Switch on the main power and air supply.
5
6
7
8
1
2
EJM8A-E-SMA060102-A01-00
Page 6-1-2-3
Optional Accessory Parts Replacement
This section describes the procedures for replacing the high-speed nozzle changer.
・Tools
Phillips screwdriver #2
Short Phillips screwdriver
#2
Allen key 3 mm
Allen key 5 mm
Pipe
Nipper
Dial gauge
Magnetic stand
Iron plate
・Jigs
FM-0655：
Nozzle changer teaching
jig
Nozzle 120 or 130
Nozzle Changer Unit (8-nozzle type)
6-1-3 Nozzle Changer Replacement (High-Speed Machines)
Caution
Dange
r
Warning
Assembly/Adjustment
15 Min.
Teaching
5 Min.
Removal/Disassembly
15 Min.
Total
35
Part
kg
EJM8A-E-SMA060103-A01-00
Page6-1-3-1