CM602all_EJM8AESM_Service Manual.pdf - 第1031页
7-2-7 Part Weight Min. Min. Tray Extension-axis Stroke Adjustment • This section describes the procedures for adjusting the extension-axis stroke. Total Phillips screwdriver #2 Allen key 2.5 mm Allen key 4 mm Teaching Re…
Remark
Direct Tray
Put the cover back on.
18
17
Item
Input the measurement value into TL
manually. Offset range: within +/- 1
This offset is stored in the tray, not in the
machine.
Tray
EJM8A-E-SMA070206-A01-00
Page 7-2-6-6
7-2-7
Part Weight
Min. Min.
Tray
Extension-axis Stroke Adjustment
• This section describes the procedures for adjusting the extension-axis stroke.
Total
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 4 mm
Teaching
Removal/Disassembly
Direct Tray
Min.
kgs.
0
Min.
Tool
Jig
Assembly/Adjustment
Jig FM-1924
Pulley-holding jig
Caution
Danger
Warning
EJM8A-E-SMA070207-A01-00
Page 7-2-7-1
the bolt shown with the arrow below.
Direct TrayTray
2
1
section.
Loosen the power locks on the motor
Move the extension-axis towards you 382.5 mm.
Left. Stay at the front side when removing
Remark
When loosening, use an Allen key and screws
as shown below so that the power locks will
not be moved.
After loosening, lightly hitting the power locks
unlocks the lock. Jig available (right picture)
Item
Phillips screwdriver #2
M4 screw 11 pcs.
3
4
Open the cover.
Return the extension-axis to the origin.
Allen key 4 mm
Screw M5 4 pcs.
Right
436.5
Screw M5×40
Allen key
EJM8A-E-SMA070207-A01-00
Page 7-2-7-2