CM602all_EJM8AESM_Service Manual.pdf - 第86页
Details of the selected data is displayed. Remark Item Installation Machine Installation 65 "Machine List Entry" windo w Select "Select Entry File(S). " 66 "Machine List Entry" windo w Selec…
* No connection to (2) above.
Voltage 200V only
* Connect the LAN cable (1).
Select the data to be
loaded beforehand.
64
Select "MC list.
"
Filer window
63
Check loading machine data from the PT.
Main window
Select "Filer."
[Danger]
Be sure to turn off the
factory's electric source
before checking
connection.
Even though the machine
is turned off, the HUB 200V
is always connected.
Item Remark
61
Check the HUB power and the communication cable for connection. For the receptacle
position, see the right picture below. From Hub to the circuit protector in Step 6
2
Installation Machine Installation
62
Connect to the circuit protector.
(1)
(2)
EJM8A-E-SMA020103-A01-00 Page 2-1-3-17
Details of the selected data is displayed.
RemarkItem
Installation Machine Installation
65
"Machine List Entry" windo
w
Select "Select Entry File(S).
"
66
"Machine List Entry" windo
w
Select data from the list box Select "Group", "Lot" and "Machine.
"
67
"Machine List Entry" window
Select "Refresh PT File List (S).
"
"Machine List Entry" window
68
Select machine data from module 1.
The data version is
displayed here.
EJM8A-E-SMA020103-A01-00 Page 2-1-3-18
* To add the data to the machine
list, press "Entry(E)."
72
Select (3) data name
.
Select (4) Yes
.
71
Machine Main Men
u
Select (1) File management
.
Select (2) Load.
70
"Machine List Entry" windo
w
Check the data are entered in the machine lis
t
Item Remark
69
"Machine List Entry" windo
w
Select "Entry(E)
"
Installation Machine Installation
60
%
(1)
(2)
(3)
(4)
EJM8A-E-SMA020103-A01-00 Page 2-1-3-19