CM602all_EJM8AESM_Service Manual.pdf - 第728页
Optional Accessory Parts Replacement This section describes the procedures for replacing the solenoid valve (for high-speed machines). • Tools Phillips screwdriver #2 Allen key 2.5 mm • Jigs None Nozzle Changer Unit (8-n…
Optional Accessory Parts Replacement
Remarks
Nozzle Changer Unit (8-nozzle type)
Item
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
17
EJM8A-E-SMA060101-A01-00
Page 6-1-1-6
Optional Accessory Parts Replacement
This section describes the procedures for replacing the solenoid valve (for high-speed machines).
• Tools
Phillips screwdriver #2
Allen key 2.5 mm
• Jigs
None
Nozzle Changer Unit (8-nozzle type)
6-1-2 Solenoid Valve Replacement (High-Speed Machines)
Assembly
A
d
j
ustment
5min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembl
y
5min.
10min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA060102-A01-00
Page 6-1-2-1
Optional Accessory Parts Replacement
Remarks
Switch off the main power and air supply.
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the connectors and the air tubes from the valve.
5-000036
Before removing, put marks on the
connectors and the air tubes so as not to
confuse 'Open' and 'Close' when putting
them back on.
Remove the valve holding screws.
Replace the valve. Allen key 2.5 mm
Screw M3 2 pcs.
3
4
1
Item
2
Nozzle Changer Unit (8-nozzle type)
1
2
EJM8A-E-SMA060102-A01-00
Page 6-1-2-2