CM602all_EJM8AESM_Service Manual.pdf - 第748页
Optional Accessory Parts Replacement Remarks Item Nozzle Changer Unit (3-nozzle type) Lock the valve. 5-000017 Allen key 2.5 mm Screw M3 2 pcs. Connect the air tubes and the connectors. 5-000036 Put the feeder cover back…
Optional Accessory Parts Replacement
Remarks
Switch off the main power and air supply.
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the connectors and the air tubes from the valve.
5-000036
Before removing, put marks on the
connectors and the air tubes so as not to
confuse 'Open' and 'Close' when putting
them back on.
Remove the valve holding screws.
Replace the valve. Allen key 2.5 mm
Screw M3 2 pcs.
3
4
1
Item
2
Nozzle Changer Unit (3-nozzle type)
1
2
EJM8A-E-SMA060202-A01-00
Page 6-2-2-2
Optional Accessory Parts Replacement
Remarks
Item
Nozzle Changer Unit (3-nozzle type)
Lock the valve.
5-000017
Allen key 2.5 mm
Screw M3 2 pcs.
Connect the air tubes and the connectors.
5-000036
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
Switch on the main power and air supply.
5
6
7
8
1
2
EJM8A-E-SMA060202-A01-00
Page 6-2-2-3
・Tools
・Jigs
6-2-3 Nozzle Changer Replacement (Multi-Purpose Machines)
Nozzle Changer Unit (3-nozzle type)Optional Part and Accessory Replacement
• This section describes the procedures for replacing the multi-purpose nozzle changer.
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Iron plate
Dial gauge
Magnetic stand
FM-0727
Position teaching jig
kgs.
10
Min.
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
10
Min.
20
Min.Min.
Danger
Caution
Warning
EJM8A-E-SMA060203-A01-00
Page 6-2-3-1