CM602all_EJM8AESM_Service Manual.pdf - 第344页
Main Body Total Time Part Weight kg 235 5-1-6 X-axis Primary-Part Replacement • This section describes the procedures for replacing the X-axis primary-part. Cover jigs (large and small) Phillips screwdriver #2 Allen key …
Machinery Part Replacement Main Body
Remarks
Item
Put the connector back on.
Switch on the main power.
Turn the switch to the right.
10
9
EJM8A-E-SMA050105-A01-00
Page 5-1-5-4
Main Body
Total Time Part Weight
kg
235
5-1-6 X-axis Primary-Part Replacement
• This section describes the procedures for replacing the X-axis primary-part.
Cover jigs (large and
small)
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Cloth
Tools
Jig
Teaching
Min.70
Assembly/AdjustmentRemoval/Disassembly
120Min.Min. Min.45
Machinery Part Replacement
Caution
Danger
Warning
EJM8A-E-SMA050106-A01-00
Page 5-1-6-1
Picture when seen from the front side.
3
4
Allen key 3 mm
Screw M4 (Special) x 2
Item
Remove the secondary parts, referring to "X-
axis Secondary-Part Replacement."
Remarks
Remove the feeder cover.
2
Turn off the power and the air.
Machine Part Replacement Main Body
Remove the head, referring to "Head
Replacement Procedures."
The secondary part is positioned on the rear
side of the head installing plate.
Disconnect the connector connecting the secondary
part near the X-axis cable bearer to the machine.
Loosen the secondary-part connector holding
bolt. Cut off the cable tie.
1
1
2
EJM8A-E-SMA050106-A01-00
Page 5-1-6-2