CM602all_EJM8AESM_Service Manual.pdf - 第744页
15 Switch on the main power and air supply. 13 16 Adjust the stroke with the cylinder adjuster. Calipers When shutter open: A: 15.75±0.25mm B=0±0.25mm When shutter closed: A=0±0.25mm B=15.75±0.25mm 14 Connect the connect…
9
Fit the joints onto the new cylinders.
Wrench 8 mm
Spacer
Joint
10
Put the cylinders on the nozzle holder
section.
11
Fix the cylinders onto the nozzle holder
section.
Allen key 2.5 mm
Screw M3 4 pcs.
12
Put the cylinder holding block back on.
Allen key 3 mm
Screw M4 10 pcs.
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Item Remarks
EJM8A-E-SMA060201-A01-00
Page 6-2-1-4
15
Switch on the main power and air supply.
13
16
Adjust the stroke with the cylinder
adjuster.
Calipers
When shutter open:
A: 15.75±0.25mm
B=0±0.25mm
When shutter closed:
A=0±0.25mm
B=15.75±0.25mm
14
Connect the connectors to the sensor.
Item Remarks
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Connect the air tubes to the cylinders.
1
2
B
A
EJM8A-E-SMA060201-A01-00
Page 6-2-1-5
Item Remarks
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Phillips screwdriver #2
Screw M4 2 pcs.
17
Put the right side cover back on.
Phillips screwdriver #2
Screw M4 4 pcs.
18
Put the feeder cover back on.
EJM8A-E-SMA060201-A01-00
Page 6-2-1-6