CM602all_EJM8AESM_Service Manual.pdf - 第625页
Machinery Part Replacement Remark Turn off the power and air supply. Remove the cover from the head unit. Phillips screwdriver #2 M4 screw 4 pcs. Remove the valve connectors and air hose. 1-000107 Put a mark on the air h…
Machinery Part Replacement
This section describes the procedures for replacing the blow valve.
Tools
Precision screwdriver
Phillips screwdriver #2
Magic marker
Jig
None
12-Nozzle Head Unit
5-10-4 Blow-Valve Replacement
Caution
Dange
r
Warning
EJM8A-E-SMA051004-A01-00
Page 5-10-4-1
Machinery Part Replacement
Remark
Turn off the power and air supply.
Remove the cover from the head unit.
Phillips screwdriver #2
M4 screw 4 pcs.
Remove the valve connectors and air hose.
1-000107
Put a mark on the air hose so that it can
be put back in the same place.
Magic marker
Remove the manifold.
M4 x 20L (2 pcs)
Flat and round small
washer M4
Allen key
12-Nozzle Head Unit
3
4
1
Item
2
1
2
B7
B9
B8
B10
B12
B11
B1
B3
B2
B4
B6
B5
Valve position
M4×20L (2 pcs.)
EJM8A-E-SMA051004-A01-00
Page 5-10-4-2
Machinery Part Replacement
Remark
12-Nozzle Head Unit
Item
Replace the valve.
Precision screwdriver
Valve-installing screw 2
pcs.
Connect the connector and the air hose to the valves.
Put the head cover back on.
Phillips screwdriver #2
M4 screw 4 pcs.
Turn on the power and air supply.
5
6
7
8
1
2
(1) Two valve-installing
screws.
EJM8A-E-SMA051004-A01-00
Page 5-10-4-3