CM602all_EJM8AESM_Service Manual.pdf - 第154页
Maintenance Adjustment Main Body Beam ・ Tools Phillips screwdriver #2 Allen key 2.5 mm Allen key 3 mm Wrench 13 mm Iron plate Dial gauge Magnetic stand ・ Jig None Be sure to turn off the SERVO switch when working on the …
Maintenance Adjustment Main Body Beam
Remarks
Item
Once the adjustment is finished, lock the sensor.
3-000056
Allen key 2.5 mm
Screw M3
2 pcs. for each sensor
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
6
5
EJM8A-E-SMA040105-A01-00
Page4-1-5-3
Maintenance Adjustment Main Body Beam
・Tools
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 3 mm
Wrench 13 mm
Iron plate
Dial gauge
Magnetic stand
・Jig
None
Be sure to turn off the SERVO switch when working on the machine.
4-1-6 Leveling the Support Plate
This section describes the procedures for leveling the support plate.
Assembly
Adjustment
20min.
Teaching
50min.
Total Time Weight of
Part
Removal
Disassembly
20min.
90min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA040106-A01-00
Page 4-1-6-1
Maintenance Adjustment Main Body Beam
Remarks
Set the support plates.
Take care with orientation of the plates.
Widen the conveyor to maximum.
Type L: 460.00 mm
Place the support pins on the plates.
Support pin: 74 mm
Item
2
3
1
4
Press [Support pin change] to set the support plates.
EJM8A-E-SMA040106-A01-00
Page 4-1-6-2