CM602all_EJM8AESM_Service Manual.pdf - 第931页
Nipper Allen key 3 mm M4×8L 3 pcs. M4×10L 2 pcs. M4×12L 2 pcs. Loosen the motor shaft holding screws. Disconnect the motor connector. Cut off the cable tie. Allen key 3 mm Allen key 4 mm Screw M4 2 pcs. Screw M5 2 pcs. L…
Item
Open the cover of the delivery position. Open the maintenance door.
Remove the door switch connector.
1
Switch off the power.
Remarks
Remove the top cover.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 8 pcs.
M4×10L Truss 2 pcs.
Remove the cover holding screws.
3
4
Tray Shuttle Tray
Allen key 3 mm
M4 x 10L 1 pc.
2
Allen key 3 mm
Phillips screwdriver #2
M4×8L 3 pcs.
M4×10L 2 pcs.
M5×15L Truss 2 pcs.
Door switch of
Delivery position
EJM8A-E-SMA070109-A01-00
Page 7-1-9-2
Nipper
Allen key 3 mm
M4×8L 3 pcs.
M4×10L 2 pcs.
M4×12L 2 pcs.
Loosen the motor shaft holding screws.
Disconnect the motor connector. Cut off the cable tie.
Allen key 3 mm
Allen key 4 mm
Screw M4 2 pcs.
Screw M5 2 pcs.
Loosen the tension and remove the belt.
Remove the motor shaft holder.
Remarks
Remove the cover from the motor section.
Item
5
6
7
8
Tray Shuttle Tray
Motor shaft holder
EJM8A-E-SMA070109-A01-00
Page 7-1-9-3
Item Remarks
Tray
Secure the cables with a cable tie.
9
Remove the motor holding screws.
Allen key 4 mm
Screw M5 2 pcs.
Allen key 4 mm
Screw M5 2 pcs.
Replace and install the motor.
Connect the motor connector.
10
11
12
Shuttle Tray
Allen key 1.5 mm
Setscrew M3
Nipper
Tighten the motor shaft holding screws.
EJM8A-E-SMA070109-A01-00
Page 7-1-9-4