CM602all_EJM8AESM_Service Manual.pdf - 第522页
Machinery Part Replacement Remarks Item Z Unit (3-nozzle type) Teach "Z-axis Origin Offset" Refer to "Z-axis Origin Offset." Section 4-3-3 17 EJM8A-E-SMA050505-A01-00 Page 5-5-5-6
Machinery Part Replacement
Remarks
Item
Z Unit (3-nozzle type)
Put the front motor bracket back on.
Allen key 3 mm
Screw M4 3 pcs.
Connect the connector.
Put the top cover onto the head back on.
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 2 pcs.
M4 2 pcs.
Switch on the main power.
16
13
14
15
EJM8A-E-SMA050505-A01-00
Page 5-5-5-5
Machinery Part Replacement
Remarks
Item
Z Unit (3-nozzle type)
Teach "Z-axis Origin Offset"
Refer to "Z-axis Origin Offset." Section 4-3-3
17
EJM8A-E-SMA050505-A01-00
Page 5-5-5-6
Machinery Part Replacement
This section describes the procedures for replacing the valves and the manifolds.
• Tools
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 3 mm
Nipper
• Jigs
None
5-5-6 Valve and Manifold Replacement
Since the housing and the connector pin cannot be re-used once a connector pin is
removed, a single valve cannot be replaced; a set of three valves should be replaced.
Z Unit (3-nozzle type)
Assembly
A
d
j
ustment
20min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembl
y
20min.
40min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA050506-A01-00
Page 5-5-6-1