CM602all_EJM8AESM_Service Manual.pdf - 第600页

Machinery Part Replacement Remarks Cutting Unit Item Put the feeder cover and the chute back on. Phillips screwdriver #2 Allen key 3 mm Screw M4 2 pcs. Screw M4x10mm 3 pcs. Thick washer 3 pcs. From 0.49MPa to 0.54MPa Swi…

100%1 / 1093
Machinery Part Replacement
Remarks
Cutting Unit
Item
Connect the cylinder tubes.
Air tube φ8　4 pcs.
Secure the air tubes with cable ties.
Nipper
Cable tie 150 6 pcs.
Put the lower cutter cover back on.
Allen key 3 mm
Screw M4x10mm 5 pcs.
Put the upper cutter cover back on.
Allen key 3 mm
Screw M4x8mm 5 pcs.
25
26
27
28
EJM8A-E-SMA050904-A01-00
Page　5-9-4-8
Machinery Part Replacement
Remarks
Cutting Unit
Item
Put the feeder cover and the chute back on.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4x10mm 3 pcs.
Thick washer 3 pcs.
From 0.49MPa
to 0.54MPa
Switch on the main power and air supply.
29
30
1
2
EJM8A-E-SMA050904-A01-00
Page　5-9-4-9
5 Machinery Part
Replacement
(12-Nozzle Head Unit)
This section describes the procedures for replacing the
machinery parts of the 12-nozzle head unit and for teaching.
EJM8A-E-SMAA-0000
Confidential