CM602all_EJM8AESM_Service Manual.pdf - 第740页
A ssembl y A d j ustment Teaching Total Time Weight of Par t min. 40 Kgs. min . min. 20 min. 20 ・ Tools ・ Jig Removal Disassembl y 6-2-1 Slide Cylinder Replacement (Multi-Purpose Machines) Optional Accessory Parts Replac…
Optional Accessory Parts Replacement
Allen key 2.5 mm
Round cross-head screw
M3
3 pcs.
Nozzle Changer Unit (8-nozzle type)
Remarks
8
7
6
5
Tighten the screws on the stopper.
Tighten the screws on the nozzle
changer.
Item
Put the feeder cover back on.
Check the position of the stopper.
Tools and Specifications
Tools and Specifications
Allen key 2.5 mm
Round cross-head screw
M3
2 pcs.
Calipers
When shutter open:
A: 13mm±0.3mm
When shutter closed:
A: 2.5mm±0.3mm
Tools and Specifications
Tools and Specifications
Open Close
A
Apply 0.5-Mpa air pressure to the
cylinder to move the shutter.
Measure Distance A.
EJM8A-E-SMA060104-A01-00
Page 6-1-4-3
A
ssembl
y
A
d
j
ustment
Teaching Total Time
Weight of
Par
t
min.
40
Kgs.
min
.
min.20 min. 20
・Tools
・Jig
Removal
Disassembl
y
6-2-1 Slide Cylinder Replacement (Multi-Purpose Machines)
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
This section describes the procedures for replacing the slide cylinder (for multi-purpose machines).
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 3 mm
Calipers
Wrench 8 mm
Wrench 7 mm
None
Nozzle Changer Unit (3-nozzle type)
6-2
Caution
Danger
Warning
EJM8A-E-SMA060201-A01-00
Page 6-2-1-1
Disconnect the connectors from the
sensor.
2
1
Remove the feeder cover.
Switch off the main power and air supply.
Optional Accessory Parts Replacement
Phillips screwdriver #2
Screw M4 4 pcs.
4
3
Item Remarks
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the right side cover.
Nozzle Changer Unit (3-nozzle type)
1
2
EJM8A-E-SMA060201-A01-00
Page 6-2-1-2