CM602all_EJM8AESM_Service Manual.pdf - 第647页
Machinery Part Replacement This section describes the procedures for removing the θ unit. Tools Phillips screwdriver #1 Allen key 2.5 mm Allen key 3 mm Allen key 4 mm Nipper Jig None 12-Nozzle Head Unit 5-10-8 θ Unit Rem…
Machinery Part Replacement
Remark
12-Nozzle Head Unit
Item
Assemble the unit in the reverse order.
Repeat Steps 3 to 7 in the reverse order.
Install the head unit.
See "12-Nozzle-Head-Unit
Replacement."
Section 5-10-1
Turn on the power and air supply.
13
12
14
1
2
EJM8A-E-SMA051007-A01-00
Page 5-10-7-5
Machinery Part Replacement
This section describes the procedures for removing the θ unit.
Tools
Phillips screwdriver #1
Allen key 2.5 mm
Allen key 3 mm
Allen key 4 mm
Nipper
Jig
None
12-Nozzle Head Unit
5-10-8 θ Unit Removal
Caution
Dange
r
Warning
EJM8A-E-SMA051008-A01-00
Page 5-10-8-1
Machinery Part Replacement
Remark
Turn off the power and air supply.
0.49MPa to
0.55MPa
Remove the head.
See "12-Nozzle-Head-Unit
Replacement."
Section 5-10-1
Remove the front and top covers.
Phillips screwdriver #2
M4 truss screw 10 pcs.
Disconnect the
θ-motor connector. Cut off the cable tie.
Nipper
12-Nozzle Head Unit
Item
2
1
3
4
1
2
EJM8A-E-SMA051008-A01-00
Page 5-10-8-2