CM602all_EJM8AESM_Service Manual.pdf - 第504页

Machinery Part Replacement Remarks Z Unit (3-nozzle type) Item Switch on the power and air suppl y. from 0.49MPa to 0.54MPa A d j ustment: Head Camera Adjustment --- Focus and Theta Teaching: Board Recognition Camera ---…

100%1 / 1093
Machinery Part Replacement
Remarks
Z Unit (3-nozzle type)
Item
Connect the air, vacuum, and electropneumatic regulator tubes.
Be sure to lock it.
Phillips screwdriver #2
Truss screw M4 1 pc.
Put the head cover back on.
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 2 pcs.
Screw M4 2 pcs.
Put the feeder cover back on. Remove the bubble wrap.
Phillips screwdriver #2
Screw M4 2 pcs.
15
16
14
Secure the connector and the earth cable.
13
EJM8A-E-SMA050502-A01-00
Page 5-5-2-5
Machinery Part Replacement
Remarks
Z Unit (3-nozzle type)
Item
Switch on the power and air suppl
y.
from 0.49MPa
to 0.54MPa
A
d
j
ustment:
Head Camera Adjustment --- Focus and
Theta
Teaching:
Board Recognition Camera --- X and Y-
axis Origin Offset
Z-axis Origin Offset
Chip Recognition Camera --- Theta Axis
Origin Offset
Determining the Mounting Height and
Positioning the Board
Mounting Position
Pickup Position
Nozzle Exchange Position
Section 4-1-2
Section 4-2-2
SectionNo:4-2-3
SectionNo:4-2-4
SectionNo:4-2-5
SectionNo:4-2-7
SectionNo:4-2-8
SectionNo:4-2-9
18
17
1
2
EJM8A-E-SMA050502-A01-00
Page 5-5-2-6
180
See each procedures.
Phillips screwdriver #2
Phillips screwdriver #1
Volume adjusting
screwdriver
Allen key 3 mm
Allen key 4 mm
Iron plate
Dial gauge
Magnetic stand
Feeler gauge
kgs
600 min.
Total Time Part Weight
10 max.
Removal/Disassembly
240
Teaching
180 min.
Assembly/Adjustment
Machinery Part Replacement
Z Unit (3-nozzle type)
• This section describes the procedures for changing the high-speed head to the multi-purpose one.
5-5-3 Head Change (High-speed type ⇒ Multi-purpose type)
・Tools
・Jigs
min. min.
Dange
r
Warning
Caution
EJM8A-E-SMA050503-A01-00
Page　5-5-3-1