CM602all_EJM8AESM_Service Manual.pdf - 第371页

Min. 45 Min. Phillips screwdriver #2 Allen keys 3 mm Allen keys 4 mm Cloth Teaching Tools Jig Min. 70 kg 235 Min. • This section describes the procedures for replacing the X-axis linear scale. Total Time Part Weight Asse…

100%1 / 1093
Teaching
29
Put the Z clamp plates back on
the conveyor.
項目(ITEM) 備考(REMARK)
Machine Part Replacement Main Body
Allen key 3 mm
Special screw M4 x 8
16 pcs.
30
Check the height of the lead checker.
For "Multi-Purpose" head
only
See Section 4-1-9 "Lead
Checker Height
Adjustment."
31
High-Speed Head Multi-purpose Head
4-2-2 "Board Recognition Camera --- X and Y-axis
Origin Offset"
4-2-3 "Z-axis Origin Offset"
4-2-4 "Chip Recognition Camera - Theta-axis Origin
Offset"
4-2-5 "Determining the Mounting Height and
Positioning the Board"
4-2-6 "XY Plane Calibration"
4-2-8 "Pickup position"
4-2-9 "Nozzle Exchange Position"
4-2-10 "Light Intensity"
4-2-7 "Mounting Position"
4-3-2 "Board Recognition Camera --- X and Y-axis
Origin Offset"
4-3-3 "Z-axis Origin Offset"
4-3-4 "Chip Recognition Camera --- Theta Axis
Origin Offset"
4-3-5 "Determining the Mounting Height and
Positioning the Board"
4-3-6 "XY Plane Calibration"
4-3-8 "Pickup Position"
4-3-9 "Nozzle Exchange Position"
403-10 "Load Head"
4-3-11 "Lead Checker"
4-3-12 ""Light Intensity"
4-3-7 "Mounting Position"
32
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
2.7 mm
0.3 to 0.5 mm
Z clamp plate
Transfer
conveyor belt
EJM8A-E-SMA050109-A01-00
Page　5-1-9-9
Min.45 Min.
Phillips screwdriver #2
Allen keys 3 mm
Allen keys 4 mm
Cloth
Teaching
Tools
Jig
Min.70
kg
235
Min.
• This section describes the procedures for replacing the X-axis linear scale.
Total Time Part Weight
Assembly/AdjustmentRemoval/Disassembly
120
Special shim (0.15 mm)
Linear-scale adjustment jig
PWT18
5-1-11 X-axis Linear Scale Replacement
Main BodyMachinery Part Replacement
0.15 mm
32.0
75.0
Caution
Danger
Warning
EJM8A-E-SMA050111-A01-00
Page　5-1-11-1
Turn off the power and the air.
Main Body
Remove the side covers.
Remove the scale holding plate.
Machine Part Replacement
2
1
Item
Remove the feeder cover.
Remarks
Allen key 3 mm
Screw M4 (Special) x 2
Phillips screwdriver #2
Flat head screw M3x5L
2 pcs.
3
4
1
2
AF
BR
AR
BF
1
2
EJM8A-E-SMA050111-A01-00
Page　5-1-11-2