CM602all_EJM8AESM_Service Manual.pdf - 第747页
Optional Accessory Parts Replacement Remarks Switch off the main power and air supply. Remove the feeder cover. Phillips screwdriver #2 Screw M4 2 pcs. Remove the connectors and the air tubes from the valve. 5-000036 Bef…
Optional Accessory Parts Replacement
This section describes the procedures for replacing the solenoid valve (for multi-purpose machines).
・Tools
Phillips screwdriver #2
Allen key 2.5 mm
・Jig
None
Nozzle Changer Unit (3-nozzle type)
6-2-2 Solenoid Valve Replacement (Multi-Purpose Machines)
Assembly
Adjustment
5min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembly
5min.
10min. kgs
Caution
Dange
r
Warning
EJM8A-E-SMA060202-A01-00
Page 6-2-2-1
Optional Accessory Parts Replacement
Remarks
Switch off the main power and air supply.
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the connectors and the air tubes from the valve.
5-000036
Before removing, put marks on the
connectors and the air tubes so as not to
confuse 'Open' and 'Close' when putting
them back on.
Remove the valve holding screws.
Replace the valve. Allen key 2.5 mm
Screw M3 2 pcs.
3
4
1
Item
2
Nozzle Changer Unit (3-nozzle type)
1
2
EJM8A-E-SMA060202-A01-00
Page 6-2-2-2
Optional Accessory Parts Replacement
Remarks
Item
Nozzle Changer Unit (3-nozzle type)
Lock the valve.
5-000017
Allen key 2.5 mm
Screw M3 2 pcs.
Connect the air tubes and the connectors.
5-000036
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
Switch on the main power and air supply.
5
6
7
8
1
2
EJM8A-E-SMA060202-A01-00
Page 6-2-2-3