CM602all_EJM8AESM_Service Manual.pdf - 第935页
Item Remarks Tray Shuttle Tray 21 Allen key 3 mm M4×8L 3 pcs. M4×10L 2 pcs. M4×12L 2 pcs. Put the cover back on the motor section. Allen key 3 mm Phillips screwdriver #2 M4×8L 3 pcs. M4×10L 2 pcs. M5×Truss 15L 2 pcs. 22 …
Adjustable distance: +/- 3 mm
(The hole is 3-mm long.)
12
34
Remove the jig from the door
Item Remarks
Shuttle TrayTray
17
Allen key 3 mm
Screw M4 2 pcs.
If it is necessary to adjust the distance, loosen the bolts that are positioned
at the back of the belt clamp, and adjust the distance.
18
Allen key 3 mm
Screw M4 2 pcs.
If it is necessary to adjust the distance more than 3 mm,
loosen the bolts below and move the belt.
19
Carry out "Return to origin." Check the distance.
20
switch connector.
30
B
A=727st
(770)
C
D
E
EJM8A-E-SMA070109-A01-00
Page 7-1-9-6
Item Remarks
Tray Shuttle Tray
21
Allen key 3 mm
M4×8L 3 pcs.
M4×10L 2 pcs.
M4×12L 2 pcs.
Put the cover back on the motor section.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 3 pcs.
M4×10L 2 pcs.
M5×Truss 15L 2 pcs.
22
Put the top cover back on.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 8 pcs.
M4×Truss 10L 2 pcs.
24
Close the maintenance door.
Allen key 3 mm
M4 x 10L 1 pc.
Connect the door switch connector.
23
Put the cover back on.
Door switch of
Delivery position
EJM8A-E-SMA070109-A01-00
Page 7-1-9-7
Item Remarks
Tray Shuttle Tray
25
carry out machine parameter teaching.
See Section 7-1-2. "Shuttle
Tray Pickup Position
Teaching."
Once the mechanical adjustment is complete,
EJM8A-E-SMA070109-A01-00
Page 7-1-9-8