CM602all_EJM8AESM_Service Manual.pdf - 第970页

Disconnect the sensor connector. 3 4 2 1 Cut off the cable tie. Remove the LED sensor. Remove the top cover. Phillips screwdriver #2 Allen key 3 mm Screw M4 2 pcs. M4 x 10L 8 pcs. Nipper Remarks Allen key 2.5 mm Screw M3…

100%1 / 1093
7-1-16 Head LED Sensor Replacement
Shuttle TrayTray
This section describes the procedures for replacing the head LED sensor.
Total Part Weight
Assembly/AdjustmentRemoval/Disassembly
78
Min.
15
Pickup position adjustment
jig
Nozzle jig
Allen key 2.5 mm
Allnen key 3 mm
Phillips screwdriver #2
Nipper
Teaching
Tools
Jigs
Min. Min. kgs.
30
Min.
Dange
r
Warning
Caution
EJM8A-E-SMA070116-A01-00
Page　7-1-16-1
Disconnect the sensor connector.
3
4
2
1
Cut off the cable tie.
Remove the LED sensor.
Remove the top cover.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
M4 x 10L 8 pcs.
Nipper
Remarks
Allen key 2.5 mm
Screw M3 2 pcs.
Switch off the power.
Item
Shuttle TrayTray
EJM8A-E-SMA070116-A01-00
Page　7-1-16-2
Tray Shuttle Tray
5
6
7
8
Lightly fix the sensor in place.
Item Remarks
Install a new sensor.
Secure the cables with a cable tie.
Mount the jig.
Remove the sheet from the transfer unit.
Switch on the power.
Do not touch these
screws.
EJM8A-E-SMA070116-A01-00
Page　7-1-16-3